GoPro 3, 3+, 4 Handheld 3 Axis Gimbal BeStableCam

Specifications:

• Bestablecam SteadyGim3 Evo Gimbal
• Handheld Digital Stabilizer for GoPro 3/3+/4
• Hidden wires routed through gimbal frame
• GoPro chargeable directly from gimbal power
• 7-12 hours of extended battery life
• Longer field use without charging/changing batteries
• Lightweight, easy to carry, and simple to use
• Thumb screws enable quick-release of camera bracket
• Non-GUI interface; plug-and-play ready
• Electronic slow-down for "follow" mode on both Yaw and Pitch axes.
• Equipped with four rechargeable batteries and one battery charger. Each battery type is 18650, and rated 3.7 volts @2000mAh.
• Compatible with the Lumenier Layer Lens protection for GoPro Hero 3.
• Supports Remote Control
• Supports adding GoPro LCD BacPac to camera
• Supports extended battery types to work for longer periods
• High torque motors for better gripping power and control accuracy.
• No judder or jerking in 360-degree rotation.
• Can be used to in a wide range cameras such as the Sony 5N, Panasonic GH series, Canon 5D Mark II / Mark III, Black Magic Production Cinema, Black Magic Pocket Cinema Camera, Red Epic camera, etc.
• Available for aerial photographywith an attachable replacement kits.
• Quick and simple to change set up adjustments. No tools needed to balance camera,
• Ready to work - pre-assembled and balanced at our factory.
• Slight adjustment may be needed when a different camera lens is used.
• Uses original AlexMos 32bit simple brushless gimbal controller system.
• Supports heavier cameras and high wind conditions.
• Negligible sound emitted by these highly efficient motors.
• When making lens changes with a 100g difference, unlock the camera tray from frame and realign camera's CoG (centre of gravity) with gimbal's CoG (projected intersection point where roll-axis motor shaft and tilt-axis motor shaft meet).
• For major changes in cameras and lenses, we provide software and instructions for you to adjust PID settings via your computer to balance your gimbal.
• When using multiple cameras and lenses, note the corresponding PID settings for different camera and lens combinations for a no-rush experience.
• Can power it "ON" with no camera mounted, but not recommended. It won't level out, since it's too much out of balance without a camera mounted.
• Well balanced, but pay attention and make adjustments if needed.
• When balancing a gimbal, remove lens cap and insert battery and memory card to ensure accurate balance.
• Function Instruction:
  • Heading Following Mode - Pitch and roll locking, heading smooth rotation follow the direction of the handheld.
  • Heading And Pitch Following Mode - Roll locking, heading and pitch smooth rotation follow the direction of the handheld.
  • Locking Mode - Heading, pitch and roll locking.
  • Special Working Condition (Inversion Mode) - When in any working mode, press the function button three times in succession, the Digital Stabilizer will enter into the inversion mode and switch to the Heading following mode automatically. Invert the Digital Stabilizer to capture more excited scenes easily by switching mode combination. When in inversion mode press the function button three times in succession to reset the Digital Stabilizer back to the original state.
• Operation Skill:
  • Smooth And Steady Filming: Maintain a stable movement position using the arm, which holds the Gimbal.
  • How To Adjust The Pitching Angle: Double press the function button to enter into "Heading And Pitch Follow" mode. Hold the Digital Stabilizer at the desired angle and then press the button once to re-engage "Heading Follow" Mode in order to lock the angle of desired pitch.
  • Selfie: Turn the Digital Stabilizer 270° so the function interface is facing you. Then, simply adjust the angle of pitch to the desired angle by utilizing the "Heading and Pitch Follow" Mode, which is described above and then switch back to "Heading Follow" Mode. Once complete you can film yourself with ease.
  • Flexible Use Of Inversion Mode: Press the function button three times in succession, the Digital Stabilizer will switch to the inversion mode and help to captured low angle views more easily. If filming whilst moving forward at a high speed, keep the handle roughly parallel with the ground, this will ensure a square footage.
• Initialization Instructions:
  • Install the camera properly.
  • Digital Stabilizer to be placed on stationary flat surface and maintain a motionless status.
  • Power on the Digital Stabilizer.
  • The Digital Stabilizer is activated and it will initialize automatically. Pick up the Digital Stabilizer to work normally.
• Calibration:
  • Turn on the gimbal by pressing the on/off button on the bottom of the handle.
  • Quickly place the handle on a stable hard surface and keep still. The battery indication light will start to blink four times repeatedly.
  • Before turning on the stabilization using the mode button hold the up button for 1 second. Watch the amber mode light on the back of the roll motor. The light will now blink three times repeatedly.
  • Press the down button and hold for 1 second. The amber mode light on the back of the roll motor will now turn off.
  • Initialization is now complete.
  • Press and hold the mode button until the gimbal comes to life. Gimbal is now ready to use.
• Package Content:
  • SteadyGim3 EVO Gore 3 axis Handheld Gimbal
  • USB Updater
  • Battery Charger
  • 2 x Rechargeable Batteries
  • Camera holder
  • M2.5x9mm thumb screws x 2pcs
  • M2.5 x 19mm thumb screws x 2pcs
  • 1 x GoPro charge cable
  • 1 x Battery extension tube
• 12 month warranty