Acatana Remote Flip Key for MAZDA 2 3 6 2003 2004 2005 2006 2007 2008 2009 4D63 Chip 433MHz Visteon

Remote Control Flip Key Keyless Entry for MAZDA included Transponder Chip and Battery 

• Blade type: MAZ24R

• Chip: 4D63

• Frequency: 433 MHz

• Model: Visteon 

!Please make sure your original remote has the same chip 4D63 and the Frequency is 433 MHz before buying this item, if the chip number and frequency are different this remote will not work for your car! 

!Please make sure the version of your original key has Visteon which is located underneath the key blade or on/inside your remote part. This key is only suitable for Visteon 433MHz with a 4D63 chip!

Suitable for the following models:

• MAZDA 2  2002 - 2006

• MAZDA 3 BK Series 1 2003 - 2006

• MAZDA 3 BK Series 2 2006 - 2009

• MAZDA 6 2002 - 2006

• MAZDA BT 50 2006 - 2014

It's a good way to buy a new remote key for your car.

NOTES:

• When training remotes, the old remotes are removed from memory during the training procedure.

• Please ensure all remotes (both old & new) are available with you to be trained at the same time.

• The key transponder chip programming requires the use of a scan tool and must be performed by an authorized locksmith or dealer.

• Key blade will need to be cut (this key is UNCUT)

• Up to 4 remotes can be learned by the vehicle.

How to program remote yourself:

Preparatory Steps

• Sit in vehicle with driver’s door open (all other doors and boot closed).

• 1. Lock and unlock driver's door using a power lock switch or Electronic Window Lock Switch

• 2. Insert the original key into the ignition. Turn the key to the ON position and return to Lock (OFF) Position 3 times. Leave the key in ignition in Lock (OFF) position. (ON, OFF, ON, OFF, ON, OFF)

• 3. Close and open the Driver’s Door 3 times. Leave the Driver’s Door open after this step.

• 4. The vehicle should respond by locking and unlocking the doors once

• 5. Press the lock button on the remote TWICE

• 6. The vehicle responds by locking and unlocking doors

Additional remotes:

• Repeat steps 5-6
• For up to 4 remotes total

Ending programming procedure:

• Remove the key from the ignition

• The vehicle will respond a final time with a series (about 4) of door lock and unlock cycles.