1"Drive Torque Multiplier Hand Lug Wrench Wheel Nut Remover 1-58 Ratio

This labor saving wrench is a newly designed wheel wrench for easy loosen truck tyres lug nut or car tires by using less effort to reach a sufficient output torque without impact or Compressor needed.
Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles 
Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity; 
With 1:58 gear ratio bringing 4800 NM
Textured rubber foam handle for better grip 
Heavy-duty carrying case
Remove lug nut caps and place correct socket on to the lug nut; Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage; Attach the handle and turn in the direction you wish to move the nut, extension bar helps to remove nuts quickly after being loosened; Use the square socket for square duel lug studs.

Case Size:380 x 95 x 215mm
Material: 40CR
Torque Input end square head size: 1 inch 25.4 x 25.4 mm
Torque Output end square head size: 1 inch 25.4 x 25.4 mm
Torque Multiplier Ratio: 1:58
Weight: 9.5kg
Package Content:‎
1 x Manual
1 x 1-inch drive torque multiplier heavy duty lug wrench
1 x rocking bar handle
3 x 6-point sockets sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm)
1 x 4 point square socket (Size: 13/16 inch (21mm)
1 x extension bar