Duinotech Micro bit Mini Smart Car Bluetooth STEM Educational Robot Kit

• A fun to build robot that uses a micro:bit microcontroller board (sold separately) that kids can code or control using their Smartphone via Bluetooth.
• The kit is easy to assemble and no soldering is required.
• The included infrared and ultrasonic modules connect with the micro:bit, which enables the robot to follow a line, avoid or follow obstacles, and more.
• Other features include an onboard buzzer to produce sounds, an 18 RGB LED ring for amazing colour effects, and a photocell to detect light intensity.
• Two large RGB lights on the front are used to indicate the robot’s direction as it travels.
• Once kids are competent using the micro:bit, they can create their own code to get the robot to use the micro:bit’s accelerometer, compass, and 5x5 LED matrix. A 3.6V Li-ion rechargeable battery is required for power 
  (sold separately).

Note: 
• micro:bit not included (use XC4324)
• 3.6V Li-ion rechargeable battery also required (use SB2298)

Included:1 x Smart Robot Shield Base
1 x Ultrasonic Sensor Module
1 x Round LED Module
2 x Wheels
1 x Screwdriver
1 x USB Cable
3 x 100mm Jumper Wires
4 x 150mm Jumper Wires
1 x Omnidirectional Wheel
4 x Copper Pillars
3 x Acrylic Mount Boards
Screws and Nuts

WARNING: KEEP OUT OF REACH OF CHILDREN.

Button Cell Batteries are Hazardous (new or used). Keep batteries away from children. These Batteries
can cause severe or fatal injuries within 2 hours or less if swallowed or placed inside any part of the body.
Medical attention should be sought if it is suspected a battery has been consumed or inserted; Call the 24-hour
Poisons Information Centre in Australia on 131126 or New Zealand on 0800 764 766 or contact your country's
emergency department.