12V 8KW Diesel Air Heater LCD Thermostat Vent Tank for Caravan Motorhome Remote Control-Black

Application

Fit For Motorhomes, Campervans, Caravans (also known as Travel Trailers and Camper Trailers), Fifth-wheel Trailers, Popup Campers and Truck Campers.

Also Fit for Small Truck, Big Truck, Light Truck, Heavy Truck, Pickup, Van,Bus,Car,SUV, Boat, Forklift, Electric Tricycle, Engineering Vehicle, Yacht and so on.

Specifications:

Power:8KW

Fuel : diesel

Car Air Conditioning Type: Heating

Rated Voltage: 12V

Fuel Consumption(L/h): 0.14-0.34

Working Temperature of the Heater: -40 Degree Celsius ~+50 Degree Celsius

Working Temperature of the Oil pump: -40 Degree Celsius~+40 Degree Celsius

Item Size: 390*145*145mm

Heater Color: Red&Black

Material: Metal & Plastic

Features:

• The heater can be applied for heating the cab of the freight vehicles, van s, storage battery cars and all kinds of other vehicles.

• Can preheat the coolant of the engine to avoid wear and tear of engine that started at low temperature;

• Can eliminate the window frost;

• Environmentally product, low emissions, low fuel consumption; heater exhaust emissions to meet euro IV engine emissions requirements.

• Compact structure, easy to install;

• Can dismantle to a new car when replace vehicle.

• Volatile technology, by the ceramic ignition plug will fuel heating evaporated into gas, fast ignition, full combustion.

• The use of advanced automatic control technology, with a reliable abnormal operating conditions.

• Fuel, electricity, temperature can be set arbitrarily .

• Can use diesels as fuel.

Package included:

1 x 8 KW Parking heater

1 x Wireless Remote 4 buttons

1 x Digital Thermostat

1 x 10 L Plastic Tank

1 x Exhaust Silencer

1 x Main wiring Harness

1 x Fuel Pickup

1 x Fuel pump Fuel supply 22 ml

1 x Fuel pump clip

2 x Vents

1 x Mounting Plate

1 x T-piece

2 x Duct

1 x Exhaust Pipe

1 x Air intake Pipe

1 x Air Filter

1 x Fuel line

1 x Diesel Filter

1 x Oil pipe(24cm)

2 x Oil pipe clip

2 x Zinc alloy Fixing clip

4 x Nuts

8 x Screws

10 x Plastic cable ties

10 x Zinc alloy Fastening buckle

Install & Use Attention

1 Try to rotate the impeller to ensure that it can rotate freely and smoothly. If it cannot rotate freely, you need to use a tool to adjust the gap of the impeller.

2  The heater should be directly connected to the power supply to ensure that the battery is above 80A, the power supply current is above 20A, and the voltage is 11.5~12.8V.

3 The intake pipe and exhaust pipe should not be bent too much to keep the ventilation smooth, and ensure that at least 10cm or 0.79in in front of the air inlet

4 When the heater is turned on for the first time, it needs to match with remote control and lead the oil to the main engine.

5 Please gently tear off the protective film on the top of the LCD screen before use.

6 The distance between the fuel pump and the machine should be 1.5~2 m.

7 Please provide the machine with good quality diesel.

8 Exhaust pipes must be installed outdoors or outside your vehicle.

9 When assembling the machine, don't reverse the direction of the oil pump.

10 When installing the heater, it must be horizontally with the outlet facing down.

11 When the machine first started, because there was no diesel oil in the tube, if the machine could not sense the oil in two minutes, it would stop automatically.After the machine stops running, restart it.

12 When you turn off the heater, it will continue to run until there has no fuel in it.Do not forcibly disconnect the power supply, or it will damage the machine.

13 Turn the fan on about 1.5 min, and the oil pump starts to work.