12V 6A PV SOLAR CHARGE CONTROLLER NIGHT LIGHT MODE LOAD TERMINAL MANSON
This series of low powered and cost effective PV ChargeController is designed for trouble free application in remote high humid environment. The whole unit is potted in Epoxy Resin. It is suitable for seal or wet type lead acid battery and all types of PV modules.
The full solid state electronic components using 0 to 100% Pulse Width Modulation charging and power switching byMOSFET assures optimal utilization of sunlight and safe charging of battery.
Selection for charging sealed or wet type of battery ismade possible by shorting of terminal wire. The SBC-2106L is made with Night Light Load DC output.
Features:
Specifications:
| Battery System Voltage |
12 VDC
|
|
| Max. PV Open Circuit Voltage |
26 VDC
|
|
| Max. PV Short Circuit Current |
6A
|
|
| PWM Setpoint |
Sealed Type Battery Setting: 14.3V ± 0.1V
|
|
|
Wet Type Battery Setting: 14.8V ± 0.1V
|
||
| Min. Operating Voltage |
3VDC
|
|
| Rated Charging Current |
6A
|
|
| Max. Charging Current (5 mins.) |
8A
|
|
| Rated Load Current |
6A
|
|
| Max. Load Current (1 min.) |
8A
|
|
| PV Voltage While Load Turn ON |
SBC-2106 does not have load terminals
|
<= 3.5V
|
| PV Voltage While Load Turn OFF |
SBC-2106 does not have load terminals
|
>=5 ±0.2V
|
| Low Battery Shutdown for Load |
SBC-2106 does not have load terminals
|
<= 10.5V ±0.2V
|
| Low Battery Recover for Load |
SBC-2106 does not have load terminals
|
>= 11.8V ±0.2V
|
| Approvals |
EN-55022 / EN-61001 / FCC Part 15 SUBPART B CLASS B
|
|
| Ambient Temperature Range |
-40 ~ +60°C
|
|
| Relative Humidity |
100%
|
|
| Dimension ( L xW x H ) |
97 x 46 x 20.5 mm
|
|
| Weight |
103g
|
Warranty Policy
Please refer to the individual product listing for specific warranty terms and period. Customers need to return the products back to us for a repair or replacement.
Returns Policy
30-Day Free Returns / Change of mind. Returns postage are payable by the customers.
Copyright 2024 MyDeal.com.au - © All rights reserved