Sherwood 1HP Dust Extractor: Two-Bag 600CFM 750W Vertical Dust Collector
An economical extractor for small home workshop use. The 230mm-diameter impeller is capable of removing dust from a single machine at any one time creating a normal volume of dust - such as a table saw, bandsaw, sanders and lathes. It comes standard on a base with castors for easy portability, as well as a needle felt filter bag and plastic collector bag.
It has a 1hp motor which is capable of drawing up to 600cfm. The filter bag can filter down to 35 microns of fine dust. The collection bag size is 370mm (diameter) x 650mm (deep). It has one 4in dust outlet. This extractor has found its way into thousands of workshops around Australia - due to its great value-for-money and reliability.
1HP Dust Extractor Specifications -
Motor- 750W (1HP)
Air Flow - 600CFM
Static Pressure - 4.0"/H2O
Inlet Diameter - 1 x 4in
Bag Diameter - 370mm
Bag Capacity - 57L
Assembled Size - 1575 x 650 x 425mm
There are two measurements of extractor efficiency – air flow which we measure in in cubic feet/minute (CFM) and the other lesser known measurement is static pressure that we measure in inches of water (in/H2O).
This will of course vary depending on the hose size so we list all static pressure measurements with the most common size 4in hose for consistency of comparison. As hose size increases static pressure will decrease and vice versa for smaller hose.
So make sure when you compare extractors that you get the static pressure rating as well as the CFM to ensure that you are getting a machine that will work as well as the Sherwood range.
GTIN: 9348064018700
Shipping Details
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee
Learn More