1.Fixed frequency :(433mhz) for copying 99.99% common fixed and learning code remote controls.Face to face copying the functions of your original remote by 4 channel RF duplicator with code learning functions, always have a backup.
2.Muti-Channel control£ºOne remote control 4 usage ,4 channel control different door enough bottons to conrol home doors
3.Humanized design: Handy key chain size attache to your car keys Button slide cover to protect buttons from accidental unplanned operation.
4.Widely Usage£ºUniversal remote control with strong compatibility for copy code and control the open& lock of home doors,garages,,etc.
5.Reset &Recovery Fucntion:To reset the remote simply start again with code cleaning process£¬you will have a total new remote to using.When you do accidentally erased from the remote copy code, you can simultaneously press the C and D buttons to recover the code.
This product can copy the remote control with the following chip inside: PT2262, PT2240, PT2264, PT2260, PT2242, AX5326-4, AX5326-3, SC2262, SC2260, HS2262, HS2260, LX2262, LX2260, EV1527, P527. If you fail in copying with proper operation, you might have to check whether your device has a chip above.
This product can not clone IC is HCS300 301 and compatible rolling code IC et.
HCS rolling code and encryption chip remotes can not work.
How to Program:
Because the fob has code when it was produced, so you need to reset it before copying.
Reset:
Hold buttons A and B down simultaneously, once the LED is flashing continuously, release both buttons to complete the reset.(If your remote hasn't have button A or B, just press the top two buttons)
Copy:
Hold down the button on the original remote you want to copy while simultaneously pressing and holding which button you want to program on the new fob (A, B, C, D etc.).£¨Both your original remote and new remote’s head should close to each other£©
The process will be complete with the fob LED flashes.
Tips:
If you reset the code that you had copied and want to recover, press buttons C and D (or the bottom two buttons) until LED light flashing.
Notice:
If done correctly, can use directly. If not, or individual button not useful, please turn to clean and copy again, notice the change of light during operation. If problems still exist after attempting several times, check the chip and frequency of original remote control again, and contact us.
Package Includes:
5 x Remote Control Key Fob