A1706 TOA 60W Mic Mixer & PA Amplifier 6X Mic, 3X Aux Inputs - TOA Phantom Power Provided 60W MIC
| Spec | |
| Power Source | AC mains 50/60Hz |
| Rated Output | A-1706: 60W A-1712: 120W A-1724: 240W |
| Power Consumption | A-1706: 150W (rated output), 60W (EN60065) A-1712: 258W (rated output), 105W (EN60065) A-1724: 532W (rated output), 220W (EN60065) |
| Frequency Response | 50 - 20,000Hz (¡Þ3dB) |
| Input | MIC 1 - 6: -60dB*, 600, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack AUX 1 - 2: -20dB*, 600, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack (Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable) AUX 3 - 4: -20dB*, 10k, unbalanced, RCA pin jack AUX 5: -20dB*, 10k, unbalanced, combined typeof XLR-3-31 equivalent and phone jack PWR AMP IN: 0dB*, 600, unbalanced, RCA pin jack (An equalizer or other signal processor connectable between LINE OUT and PWR AMP IN terminals) |
| Output | A-1706:REC: 0dB*, 600, unbalanced, RCA pin jack LINE: 0dB*, 600, unbalanced, RCA pin jack SPEAKER SELECTOR: 2 zone, high impedance (100V line/167), individual selector key, M4 screw terminal DIRECT SPEAKER OUT: High impedance (100V line/167), M4 screw terminal Low impedance (4 - 16), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.) A-1712: REC: 0dB*, 600, unbalanced, RCA pin jack LINE: 0dB*, 600, unbalanced, RCA pin jack SPEAKER SELECTOR: 2 zone, high impedance (100V line/83), individual selector key, M4 screw terminal DIRECT SPEAKER OUT: High impedance (100V line/83), M4 screw terminal Low impedance (4 - 16), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.) A-1724: REC: 0dB*, 600, unbalanced, RCA pin jack LINE: 0dB*, 600, unbalanced, RCA pin jack SPEAKER SELECTOR: 2 zone, high impedance (100V line/42), individual selector key, M4 screw terminal DIRECT SPEAKER OUT: High impedance (100V line/42), M4 screw terminal Low impedance (4 - 16), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.) |
| Phantom Power | ON or OFF for each MIC 1 - 6 with switch setting |
| S/N ratio (Band Pass: 20 ? 20,000Hz) | Over 100dB (Master volume: min) Over 76dB (Master volume: max) Over 60dB (MIC 1 - MIC 4) |
| Tone Control | Bass: ¡Þ10dB at 100Hz, Treble: ¡Þ10dB at 10kHz |
| Control Input | REMOTE VOLUME: M3 screw terminal POWER REMOTE: No-voltage make contact input, short-circuit: under 10mA, M3 screw terminal |
| Indicator | 5 point LED output level meter, Power indicator LED, Zone indicator LED |
| Operating Temperature | -10°C to +40°C |
| Finish | Panel: ABS resin, black, hair line Case: Steel plate, black |
| Dimensions (W × H × D) | 420 × 107.7 × 367mm |
| Weight | A-1706: 9.3kg A-1712: 12.6kg A-1724:13.5kg |
| Accessory | Power cord × 1, Terminal block cover × 1, Terminal block cover mounting screw × 2 |
| Option | Rack mounting bracket: MB-25B, Volume control cover: YA-920 |
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Copyright 2024 MyDeal.com.au - © All rights reserved