The Aerostar WiFi range of brushless electronic speed controllers (ESC) is designed for RC fixed wing aircraft but can also be used in helicopters. They feature super smooth startup, linear throttle response, multiple protection features, all at a fantastic price.
These AeroStar WiFi ESCs can be easily set up using the AeroStar WiFi Connect device (see ACC tab below). This device uses a WiFi connection and an APP on your android phone to configure the ESC. Otherwise, you can still use your transmitter and listening to the tones to configure the ESC.
Features:
• Powerful microprocessor with strong anti-interference
• Adjustable startup mode for either planes or helicopters
• Safety features on power up will stop the motor if the throttle is set high
• Low voltage cut-off
• Propeller Brake
• Setup via WiFi device and Android mobile APP (separate device)
• BEC with multiple voltage settings, 8.4V/7.4V/6V/5V, 5A
• ASCF (Active Switch Continued Flow) technology, higher efficiency, to massively reduce heat generation
Default settings:
• Brake: Off
• Battery type: Lipo
• Cutoff Voltage: Medium
• Timing: 15deg
• Startup mode: Normal (fixed wing)
• Governor mode: Off
• PWM Frequency: 16KHz
• BEC Voltage: 5V
• Voltage cut-off option: Reduce cutoff
• Battery Cells: Auto
• Motor rotation: Normal
• ASCF: Off
• Reverse function: Off
Specs:
Input Voltage: 2~6S lipo battery
Continuous Current: 60A
Burst Current: 80A
BEC Output: 8.4V/7.4V/6V/5V, 5A
Programmable: Yes
Dimensions: 65.5x34x21mm
Weight: 79g
Rx Connector: JR type (white, red, black)
WiFi Connect Wire: JR type (orange, red, brown)
Returns Policy
Customers may return items to warehouse for a full refund of the product cost if they are dissatisfied. This must be done within 30 days from the date of purchase, and the item must be in a good condition.
HobbyKing.com Service Centers don’t accept crash, damaged parts of the items due to misuse, and items that have been modified.
Photos and/ or videos are required for Initial Evaluation (submission via RMA). All types of FAULTY batteries are NOT required to be returned to warehouse. Photos and/ or videos are enough to justify the fault of the item.
For re-sending of items via RMA, the RMA form MUST be printed and attached on the parcel.
After submitting the RMA form, if we receive no response from your end within 45 days or once the parcel is required to send back but it is not returned to our warehouse within 45 days, it will subject to rejection of RMA application.
If HobbyKing cannot provide the replacement parts or item, the customer must return the product (in full) before they are elligable to receive a refund.