The First Ever 800W Pure Sine Wave Portable Battery Box from ANTENERGY
Whether you need portable power on the work site or a second battery to run the fridge, ANTPAK battery box is the perfect solution. The ANTPAK BP-800 provides 12V power, can be used as a 12V battery charger, battery management system, and a dual-battery system all in one. Enjoy portable power anywhere & anytime with our newest technology ANTPAK BP-800 Powered Battery Box.
If you’ve got someone in the family who simply won’t leave home without their slice of technology, a built-in 800W pure sine wave inverter provides 240V power without the need to run an external inverter or additional cabling. Power is delivered through the 240V mains socket, 2x 12V cigar lighter ports,1x Merit socket, 1xEngle socket, 2x2.4A 5V USB ports, external high-current terminals or via the 50A Anderson plug, all of which can be used simultaneously.
The ANTPAK BP-800 is compatible with all 4WD batteries, including lead acid, calcium, gel and AGM of up to 130Ah in size. For those wishing to relocate their battery or even run a second battery, in four wheel drives or caravans for example, the ANTPAK DC20 12V Battery Box with massive external terminals provides a very simple and safe solution for batteries that are not in their original location. The battery can stay contained in the sealed plastic container even when it is required to be disconnected; not only are external terminals supplied on the box for easy connection. Additionally, all DC socket provides yet another power supply for within the vehicle. Don’t forget 2x 2.4A 5V USB Power Sockets, just plug in two iPad or tablets to charge same time.
Thanks to the 50A automatic reset circuit breaker, that protects the accessory and merit sockets, you can charge your sensitive items like mobile phones and laptops without any problems.
For more information about ANTPAK BP-300, please check from ANTENERGY website here
Technical Information
Technical Information
Model name | ANTPAK BP-800 | ||
Maximum Solar panel Capacity | ≤300W solar panel with 18V(carrying idler 21.5V) | ||
Pure sine inverter | DC12V-AC240V,800W | ||
Output voltage | DC output | 12V power*2PCS, max output current:20A;12V cigar lighter*2PCS,max output current:20A; (12V power*2PCS+12V lighter*2PCS,4PCS total max current is 20A); USB 5V*2PCS, max output current:2.5A; 50A Anderson plug*1PC,max output current:12V/50A | |
AC output | AC240V*1PC,max output power:300W; | ||
Internal battery | 60AH-MAX130AH, lead acid battery | ||
Charge time | Depends on the charge method | ||
Discharge time | Depends on the power of loads | ||
Rated charging current | 10AMAX | Rated discharge current | 20A |
System voltage | 12V | Wastage of carrying idler | <50mA |
Over-voltage protect | 14.4V | Charging voltage | 15V |
Voltage of under voltage | 10.5V | Over discharge voltage | 10.5V |
Temperature | -100Cto+630C | ||
Over-load、short protect | 10ms respond | ||
protection circuit: | Over-load、short protect | ||
Warranty | 12 Months |
***battery box specs according to actual model.
Input Voltage | 12V |
Charging System Suitable for | 20 Amps |
Cut In Voltage | 13.2 VDC |
Cut Out Voltage | 12.8 VDC |
The ANTPAK can charge most types of rechargeable 12V lead-acid type battery from 60 Ahr capacity up to 140Ahr. There are four main types of 12V lead acid battery - conventional wet lead-acid battery, calcium, AGM and gel. The ANTPAK can charge both cold cranking type car batteries and deep cycle batteries.
Please refer to content ‘Getting Charged’ on page 9.
No, care should be taken to shield it from direct sunlight and the elements.
The Battery Level Icon is solid and not flashing, battery will is fully charged.
Yes, the ANTPAK will keep on float cycle. Usage is plug-and-play. The built-in battery management system prevents over-charging and over-discharging of batteries. The USB output will only supply the amount of power needed.