TOPDON Artilink200
features- code reading/clearing, turn off check engine light, I/M readiness status checking, freeze frame data viewing and vehicle identification number retrieving.
Functions
1.Reads Codes
Shows the detailed description of the current Diagnostic Trouble Code (DTC); Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
2.Erases Codes
Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Turns off Engine Fault Light (MIL)
OBD2 code reader TOPDON Artilink200 supports reading and clearing codes stored in vehicle ECU about partial Engine and Transmission faults.
4.Checks I/M Readiness Status
The I/M readiness status check works on the sensors related to emissions, checking the sensors’ running status to figure out whether your vehicle pass the emission test.
5.Reviews Freeze Frame Data
Freeze frame data retrieving checks the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs, and vehicle identification number retrieving helps users identify vehicle information.
6.Reads Vehicle Identification Number
Reads and displays the VIN for users to identify the vehicle information, the WM1, VDS, and VIS.
Features
1.Wide Vehicle Coverage
Code reader TOPDON Artilink200 is suitable for most 1996 US-based, 2000 EU-based, 2006 AU-based, 2007 Asia-based and newer vehicles that is equipped with 16pin port and is compliance with OBD2/CAN protocols. This tool works on all makes on models even Australian built Holden and Ford running OBD2 interface
2.Easily-used & Convenient
There are 4 buttons on AL200, The up/down button for scrolling the menu. The Enter and Exit button allow for navigation back and entering menu.
No Batteries or Charger needed to power the code reader, you can directly use it with power from the OBDII Data Link Connector in your vehicle.
3.Friendly-used Design
TOPDON Artilink is equipped with a 16pin connector, which is suitable for most OBD2/CAN protocol vehicles.
Equipped with a 105cm (41.34 inches) connecting cable, it enables users to have a convenient diagnosis
This code reader is made of ABS plastic, together with rubber keys.
Being designed with black-and-white LED screen (128 * 64 pixel), this code reader is great for data analyzing, even in the bright light, all the information is clearly displayed.
4.Built-in DTC Lookup
Code reader TOPDON Artilink200 features built-in OBD2 DTC lookup library which shows codes and code desciptions directly instead of wasting time in searching codes definitions on internet.
Unlike other lower-leveled versions, it supports ALL OBD2 protocols, including K Line, L Line, Double CAN, J1850 PWM, and J1850 VPW Communication Protocols.
5.Multiple Languages supported
It supports English, French, German, Spanish, Dutch.
Specifications
Display: Backlight, 128 x 64 pixel display
Operating voltage: 9~16V
Operating Current: 40~50mA
Energy Consumption: 0.6W
Power: 8 to 18 volts supplied by car battery
Vehicle Diagnosis Protocol: K Line, L Line, Double CAN, J1850 PWM, J1850 VPW Communication Protocol
Main chip model: Binding chip
Interface Type: OBD II 16PIN Standard Interface
Length: 105cm
Product Material: ABS plastic, rubber keys
Product Weight: 202g (0.45lb)
Package List
1 * Main Unit
1 * User Manual
Free Shipping
After-sales support
Product will come with a one year warranty
30 day money-back guarantee - we guarantee you'll love it or you'll get your money back
