Automatic AC Timing Water Saving Irrigation Controller Gardening Tool

Automatic AC Timing Water Saving Irrigation Controller Gardening Tool

Be the first to review this product

SOLD OUT

Description
Warranty & Return

A scientific and effective home and garden water saving equipment. Give a well care to your plants at the balcony, home and garden. Can set a fixed irrigation time for a day or a week. Has a low voltage, controller will be self-closing when turn off the power connection . Waterproof surfuce and reliable performance.

Features:

Material: Plastic
Color: Blue
Watering Time: About 1min
Temperature: ≤ 40℃
Working Pressure: ≤ 400KPA
Battery: 9V laminated alkaline cell
Faucet Type: 1/2 inch external pipe thread
Aqueous Medium: Fresh water

Notice:

Open faucet when you finish the installation, the system will work on what you have set and the working situation will be shown on the display.
You should take down the item, drain the water off and take good care of the item if you don't use it for a long time.
Do not expose to the sun and rain.
You should change the program depending your plants.
Color maybe slightly different due to variation in screen color setting.

Instructions:

Step 1: Connect with electricity
Step 2: Set Time Press "TIME", the hour starts flashing, press "▲▼" to change the hour number, then press "SET" to confirm, later the minute starts flashing, press "▲▼" to change the minute number and press "SET" to confirm.
Step 3: Set program Press "PROG", the screen shows prog, start time, running time and days. The number starts to flash. This number means the 1st pro or 2nd pro or 3rd pro etc. You can set 16 different kinds of programs. Press "▲▼" chooses the number and then press "SET" to confirm. Then set the start time, running time and days as the same method. The day 1 means everyday to water, 2 means watering once in two days, etc. The start time means when you wants to watering. The running time means how long will water. The day's means how often repeat the program.
Step 4: Check Please check yourset. Press "PROG", then press "▲▼" to check your set one by one. If you meet a program needing to modify, press "SET" and "▲▼" to modify like the third step.
Step 5: Temporary irrigation Press "ON", the running time (0:02) starts to flash. Then press "▲▼" (change the number) and "SET" (confirm the number) to set hours and minutes you need. After you change the minute's you need, press "SET" to start to watering until the end. If you wants to stop watering, please press "OFF".

Attention please:

Usually, the battery can use about 6 months. Please replace the battery in time to avoid battery running out leading to you can't close the timer and the water runs all the time. When you use the screen flash, this means the battery is going to run out, you should change the batteries soon.
You should change the program depending on your plants.
The timer has a memory function when you change the battery , the program you set still can work.
There is some dirt in water, you should clean the stainless steel filter to avoid clogging inside the connection.

Package Includes:

1 x Irrigation Controller
1 x Adaptor (match with your country)
1 x English Instruction

SKU: 979571