A tough and durable 160w portable Baier solar panel with high spec components. These rugged solar panels from Baier are built to last. They are based around CEC-approved rooftop panels, which have been tried and tested in Australian conditions and will last 25 years through sun, hail and storms. To these they have added durable hinges, clips and handles so they will fold up into a convenient portable suitcase. This then slips inside a tough, padded carry bag for ultimate ease of transport. They are constructed only with Grade A monocrystalline solar cells from the world's top 10 manufacturers and provide highly reliable power output. Monocrystalline cells are more efficient than polycrystalline ones (more power for the same physical size), which as a definite advantage in portable panels.
The panels come as standard with Anderson plug connectors, which are considered as the gold standard for 12v connectivity. They are strong, reliable, don't come undone and won't cause you to lose lots of valuable power. If you don't want to use these, they also come with an Anderson to crocodile clip connector so you can attach the crocodile clips direct to your battery. The manufacturer sells these panels all over the world, from portable versions like these to standard rooftop panels and large power station installations. The rooftop panels they are based on are CEC approved (portable ones can't be), which means they are tested to Australian standards and approved for use in home installations. They are German TUV certified and have CE approval. They also test every cell before manufacture and every panel both during and after manufacture to ensure quality. Each panel is then individually numbered and barcoded to complete their quality control process.
How much power will this panel provide? In theory a 160w panel at 13v will provide 12.3A. Charging in full sun over an 8 hour day would therefore provide 98Ah of power, or nearly enough to charge a 100Ah battery from empty (not that you should ever let your battery get close to empty!). However your system will never be 100% efficient and sunshine is never completely reliable so we would suggest reducing this by 25-30% to give you a fair estimate. That gives you around 75Ah of power per day. On average you might expect a medium-sized fridge to draw 70Ah of power per day in reasonable temperatures (2.9A x 24 hours), and lights to draw another 3-4Ah. So with this panel you could expect to maintain your battery at full charge. If you also run a TV, microwave, fan, etc. then you would be gradually eating into your full battery charge a little every day. So you need to consider how big your battery is, how much power you are planning to use, and how many days you can afford to do that before it will run too low. See our Solar Power Guide for more details on how to work this out.
This package includes an excellent basic 20A PWM solar controller/regulator. Its job is to take the higher voltage produced by your panel and then send the correct voltage to your battery depending on battery type and level of charge. As your battery gets full it will switch to a trickle charge mode to save your battery and keep it topped up. There are settings to change the battery type and the levels at which different charge levels start and cut off, and LED indicators to show you charging status and battery levels.
Estimated Delivery Time Frame: 7-14 business daysReference ID: 194568