BLX14CVL-K14 SHURE Wireless Lapel Mic System 614-638Mhz Shure Includes 1 X Blx4 Receiver, Blx1
Precision built and available in a variety of handheld, lavalier, instrument and headset configurations, BLX is the most accessible way to own the stage.
BLX single microphone system with BLX1 body pack andCVL Lavalier microphone.
_
The BLX4 single channel wireless receiver is a durable receiver with simple set-up, intuitive controls and microprocessor-controlled internal antenna diversity
Wireless "diversity" receivers feature two separate antennas for consistent signal reception.
One-touch QuickScan frequency selection quickly locates the best frequency, enabling simple set-up.
| XLR connector: 200 , 6.35 mm (1/4") connector: 50 |
| 40 mm X 188 mm X 103 mm (H x W x D) |
| 10mW |
| −105 dBm for 12 dB SINAD, typical |
| 241 g (8.5 oz.) |
| Ref. ±33 kHz deviation with 1 kHz tone, XLR connector: −27 dBV (into 100 k load), 6.35 mm (1/4") connector: −13 dBV (into 100 k load) |
| Molded ABS |
|
|
_
| SHR-BLX14CVL-K14 Operates inFreq range 614-638MHz |
_
_
The BLX1 bodypack has a lightweight and durable design. Ergonomically designed to fit comfortably in hand, with adjustable gain control.
For use with BLX Wireless systems
_
| Bodypack |
| 110 mm x 64 mm x 21 mm (H x W x D) |
| 10mW |
| 8 up to 14hr with alkaline battery |
| 75 g (2.6 oz.), without batteries |
| Moulded ABS |
| gain max -16 dBV maximum gain min (0 dB) +10 dBV maximum |
| 26 dB |
_
Centraverse clip-on lavalier condenser microphone for Shure wireless systems
The Centraverse Lavalier (CVL) offers convenience and performance in an easy-to-use, clip-on cardioid condenser microphone that features simple, no-nonsense setup made for the presenting professional.
Precision-engineered for years of use in any Shure wireless system, its compact size is ideal for presenting situations where visibility is a major concern.
The unidirectional (cardioid) pickup pattern rejects unwanted noise for superior source quality and vocal reproduction.
| Electret Condenser |
| 50 to 20,000 Hz |
| Unidirectional (Cardioid) |
| typical 600 O |
| -43.5 dBV/Pa |
| 72 dB |
| 139.0 dB |
| 117.0 dB |
| 22 dB |
| +5 V DC (nominal), 10 V maximum (DC bias) |
| Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 |
| 1.3 m (50 in.) |
| TA4F |
| 25 g (0.88 oz.) |
_
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Copyright 2024 MyDeal.com.au - © All rights reserved