Cabinet Makers Wax Dark 200ml

Surface Preparation

Prepare the raw timber using either our Orange Oil, Liquid Beeswax or Restoring and New Timber Polish.

How to Apply

1. Dip 0000 steel wool into tin and remove a small amount of wax. Rub into the timber with pressure in line with the grain.
2. Buff back with a soft, lint-free cloth or buffing pads. Can be applied without the steel wool.
3. Use up to three coats, buffing well between coats. Allow up to four hours between coats.

Dry Time

Overnight for best results

Maintenance

Depending on wear (as the surface becomes dull or dry). These natural wax finishes do breathe, so we recommend use of coasters and mats where applicable.

Clean Up

Warm, soapy water for hands or cloth. Excess wax on timber; dampen a cloth with d-Limonene or mineral turpentine.