Figure-8 RG59 Video Coax + heavy duty 2-core power cablewith tracer
Download the (.pdf)
Q. Can CCTV cameras operate over the full 100m length of the CCTV cable?
Yes. Picture remains excellent and there are no issueswith power.
Method:
We tested a connected to a powersupply over the full 100m length.
We measured voltage input at 12.18V and output voltage at 10.38V.
Current draw was 260mA and resistance was 7 Ohms.
Can I run a single 250m camera run using the whole roll?
Yes. Although the current draw of a camera will affect the outcome, our tests* indicate that there should not be anissue. As a further assurance, both ends of the cable roll are readily accessible, so as with all jobs, test it before installing it within walls or conduit.
* Test 1 was with a Dome30 CCTV camera and 12VDC. By the 250m cable run, the voltage dropped to 9.33VDC (tested by a Fluke 87-V DMM). The Dome30 operated perfectly. In test2 we dropped the voltage from the power supply (model SPS9602G) until signal was lost. At an input voltage of 10.4VDC, the camera received 6.59VDC. Any lower and signal was lost. At second test indicates that there is a fair tolerance for lower performing power supplies or cameras will higher current draw.
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.