Dual MOSFET reverse current protection, low heat productions.
With double USB ports charge
The Regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL
It is not suited for nickel-metal hydride, lithium ions or other batteries
Specifications:
Rated Voltage: 12V 24V Auto
Application: Solar System Controller
Rated Current: 10A/20A/30A
Max. PV Voltage: 50V
Max. PV Input Power:
10A: 130W (12V) 260W (24V)
20A: 260W (12V) 520W (24V)
10A: 390W (12V) 780W (24V)
Size: 133 x 70 x 34mm
Safety Instructions:
Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. The battery cable should be as short as possible to minimize loss. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL It is not suited for nickel-metal hydride, lithium ions or other batteries. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
System Connection:
Connect the battery to the charge regulator - plus and minus. it will show 1, if it detects 12V battery, 2 if it detects the 24V battery. Connect the photovoltaic module to the regulator - plus and minus. Connect the consumer to the charge regulator - plus and minus. Package:
1 x 10A / 20A / 30A Solar Charge Controller
1 x User Manual
Shipping Details
Please allow 10-14 days for delivery
NOTE: This is a direct import product. The product will be shipped from overseas
We ship across Australia, including major cities like: Sydney, Melbourne, Perth, Brisbane, Adelaide, Canberra, Newcastle and the Gold Coast
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee
Learn More
So far so good. Was easy to order and pay for. Delivery was a little bit slower than expected but this was probably on account of country of origin. No worries with this company.