CUETEC Bowtie Pool Billiard Snooker Cue Tip Prick Aerator Tool Scuffer shaper

smooth surface that also needs to be scuffed. You lightly scrape the surface of the tip using either a rotating or back and forth motion so these surfaces are scraped off so chalk will adhere to the tip.
2. Cue Tip Shaper – The purpose of the shaper side is to contour the tip to the desired dome curvature you are comfortable with. You lightly scrape the tip using a rotating motion, clockwise or counter-clockwise, making sure you work your way around the entire tip. Players commonly use a dime or nickel to measure this curvature.
3. Cue Tip Aerator – The purpose of the aerator feature is to slightly break up the surface of the tip when it is new or it has been compressed after being used for a while. You must unscrew the Bowtie in half to reveal the aerator pins. Gently roll the aerator over the tip piercing the tip with small pin holes so it will hold more chalk. You do not twirl, twist, or scrape the tip using the aerator. You will tear the tip to shreds if you do. You can then also shape and/or scuff after that.