Davey HS60-08T Pressure Pump

Robust & compact, four stage, centrifugal pump with Torrium2® constant flow control and loss of prime device for automatic water pressure. Designed for medium to large size, single and multi-storey homes. Ideal for pumping clean, nonvolatile liquids without fibres or solids in such applications as : Household water supply Irrigation Water transfer Washing systems Pressure boosting The HS Pressure System consists of a HS pump fitted with a Torrium2® controller. The Torrium2® is supplied connected electrically to the HS pump motor for: Easy non-tradesmen installation and assembly Positive safety under varied weather conditions The combination of the high pressures supplied by the multistage HS pump and constant flow control provided by the Torrium2® enables consumers to enjoy the benefits of a strong comfortable shower from a pump that does not cycle plus the reliability of adaptive technology. The complete HS Pressure System is compact and quiet providing for: Easy installation, especially where space is at a premium Non-intrusive operation, for consumer enjoyment More pressure in home outlets Choice of performance options to suit most homes Quieter household environment Improved waterway clearances to reduce impeller blockages Constant Flow and Even Water Pressure To prevent annoying fluctuations in water temperature during showers, Torrium®2 uses its intelligence to provide households with constant flow to give even water pressure. It does this with its innovative pressure and flow sensors to start the pump on a pressure drop and to stop it on low flow (~1 lpm). This avoids pump cycling when there is continuing household demand for water. Quick Cut-in for Even Pressure To give you strong pressure right from the start, Torrium®2 is designed to cut in quickly when it senses demand for water. It cuts in when the pressure has dropped to 80% of the previous top (shut-off) pressure. It uses its intelligence to automatically set this cut-in pressure each time the pump stops. In doing so, it allows the system to automatically accommodate for variations in pump performance or site conditions. Adaptive Starting Torrium®2 is clever enough to detect the difference between normal water demand and a small leak in the system, such as a dripping faucet or a leaking cistern. For very low flows, Torrium®2 automatically adapts to reduce the cut-in pressure, which can be as low as 50% of its last shut-off pressure. This significantly reduces pump cycling to improve consumer satisfaction with the system. If normal flow is required in the house (>0.5 lpm), Torrium®2 will sense this and revert to normal mode and initiate an immediate pump start. Easy Status Check To easily check the system status, Torrium®2 has three simple LED indicators. Red LED – the system is in standby mode Green LED – the pump is running Yellow LED – fault condition