Fdit WS55-220 BLDC Motor Driver Controller DC 48V 500W CNC Brushless Spindle 9.5 x 6 x 3.5 cm / 3.74 x 2.36 x 1.38 Inch Multiway Packaging socialme-eu

Brand: Fdit

Features:

• ADVANCE TECHNOLOGY: The driver is equipped with low noise, low vibration, overcurrent protection, overload protection, speed signal output, positive negative rotation control, etc.
• WIDELY USED: The controller can drive the DLDC motor with HALL or without Hall.
• GUARD: External potentiometer control/external voltage control. With overvoltage protection, over current protection, anti-blocking
• Tips: WS55-220 is a low cost 3-phase LDC motor controller with high performance. The voltage range ranges from 20VDC to 50VDC. Rated Current: 12A, Current Limit: 15A Storage temperature: -20 Hum ~ + 65 °C, humidity: <80%, no frost, frost free.
• ❤ Notes: Maximum speed: 20000 RPM, Application: Avoid direct contact with dust, vapors and corrosive gases.

Binding: Kitchen & Home

Details: Details: 1. Two speed control modes: External potentiometer: through this potentiometer speed control; External voltage: external 10VDC voltage regulation; Note: The two speed control can not be used at the same time. 2. PG signal for speed output: There is a pulse output of 5V between the connector and the floor. The output frequency is set to P (Hz), the engine class logarithm is N, and the speed is F (RPM). Then the output speed is P = F * N / 60. 3. ALM signal of the alarm output: Between the port and the earth there is a 5V alarm pulse output. 4. Positive inversion function: F/R: When you press the toggle switch on the corresponding side, the motor steering direction can be changed. With the rocker switch, the white part is up and down and then up and down. 5. Start stop (two control modes): 1. External switch EN: Transmission by switch 2. Side toggle switch EN: With the toggle switch, the white part is up and down, then to start below; for the toggle switch, the white part is in horizontal direction. Then select the start button. Note: You can only rotate one control at a time, one of the switches is closed and the other is valid. 6. Status display: red display: two flashes in the standby time are removed after starting. 7. Insulation resistance: > 100 m at ambient temperature and atmospheric pressure. 8. Insulation resistance: at normal temperature and normal pressure, 0.5 kV, 1 minute Contents: 1 x motor driver control with cable.

Package Dimensions: 6.0 x 4.1 x 1.5 inches