Fibaro Dimmer Bypass 2, Smart Home Automation device Load Dim

The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.

• Easy to use and install
• Supports low power lamps such as LEDs or energy saving compact fluorescent lamps

The Fibaro Dimmer Bypass 2 is designed to support Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw minimum 5W (e.g LED lighting).

It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cos>0.5)

Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.

This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.

Manuals:

Fibaro Dimmer 2 Manual (Size: 633 KB) Refer to chapter 3 page 7 for Fibaro Dimmer Bypass 2.

Fibaro System Overview (Size: 14.5 MB)

Videos / YouTube: