GOAP Z-WAVE SWITCH SINGLE
Is a Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.
This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of a digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.
Supported switches
The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.
| Product Details |
| Product Support |
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Note!
Do not connect the module to loads exceeding the recommended values. Connect the module only in accordance with the manual and diagrams below. Use only qualified electrician!
Manuals:
Single= Installation Manual (Size: 795KB)
Single Dry = Installation Manual (Size: 719KB)
Double = GOAP Z-Wave Double Switch Installation Manual
Dimmer = GOAP Z-Wave Dimmer InWall Installation Manual
0-10v Dimmer = GOAP Z-Wave Dimmer 0-10V Installation Manual
Motor Control = GOAP Z-Wave 24v DC Tubular Motor Controller Manual
Videos / YouTube:
https://www.youtube.com/watch?v=m3b_cuzKV7c
The smallest Z-Wave module
https://www.youtube.com/watch?v=U1LLKDQuQ48
| Technical Specifications |
|
Product Name
|
Flush 1 relay
|
|
Powered by
|
24V DC or 240V AC
|
|
Operation Range
|
30m
|
|
Max Load
|
2300W (230VAC)
|
|
Radiofrequency
|
921.42 MHz (AU/NZ Z-Wave)
|
|
Power Consumption
|
0,4W
|
|
Operation temperature
|
-10 -+40 C*
|
| Measured temperature range | 0,5o C (within 0o C - 40o C range) (optional sensor) |
|
Temperature measuring accuracy
|
0,5 C
|
|
Housing
|
ABS
|
|
Dimensions (W x H x D)
|
41,8 x 36,8 x 15,4mm
|
Warranty Policy
Returns Policy
Copyright 2024 MyDeal.com.au - © All rights reserved