GS5416PLC EDIMAX 16 Port Giga PoE Smart Switch 330W Sfp Ieee 802.3Af/at PoE Compliant Ieee
Cost Effective, Reliable, Scalable and Secure Switch Solution for SMB Networks
To increase the distance/speed of your network server and backbone connections.
The Edimax Pro GS-5416PLC smart switch comes with web-based user interface, 16 Gigabit PoE+ ports and 4 RJ45/SFP combo ports for high-speed Gigabit and long-range copper or optical connections. With smart features in SNMP v3, PoE PD Alive Check, Dual Firmware, Voice VLAN, DHCP Snooping, QoS, CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunk,IGMP v1/v2/v3 Snooping and Mirror, the smart switch providesa cost effective, reliable, scalable and secure switch solution for SMB networks. The Edimax-specific long range mode enables power and data transmission to up to 200 metersat a speed of 10Mbps, tailored for IP cameras and far away network device applications. The PoE also features auto detection and power backfeed protection to efficiently provide power and, at the same time, avoid damaging the PoE ports. The Edimax GS-5416PLC is the ideal solution to increase the distance/speed of your network server and backbone connections.
Gigabit High-Speed Connection
Complies with IEEE802.3/802.3u/802.3ab/802.3z Gigabit Ethernet Standards, the GS-5416PLC features 16 Gigabit Ethernet ports for high-speed, large file transfer and 4 SFPslots for long range optical fiber Gigabit Ethernet connections.
802.3at PoE with Auto Detection & Power Backfeed Protection
The GS-5416PLC features 24 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per port and has a total power supply of 330W (can provide 280W for PD)to power any 802.3at or 802.3af compliant power device. With PoE detection capability, the GS-5416PLC is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. If a PoE device is not detected, only network data will be transmitted. Moreover, with the PoE power backfeed protection from the passive PoE injectors, the GS-5416PLC is able to avoid damaging the PoE ports.
PoE for Easy Installation and Better Cost Efficiency
Power over Ethernet technology enables the Ethernet cableto carry both data and power, reducing cable installation and eliminating the need for extension cords or electrical outlets on the walls and ceiling. The GS-5416PLC can effectively lower installation costs and simplify deploymenteffort. The GS-5416PLC can be used with different PoE products such as access points, IP cameras or VoIP devices and is an effective solution for network environments where power outlets are difficult to access.
PoE Powered Device Alive Check
Featuring PoE Powered Device (PD) alive check, the switchcan be configured to monitor real-time status of connected PDs by ping action (sending alive-checking packets). If a PDfails to response, the GS-5416PLC PoE Switch will reboot thePD, which enhances the reliability of the network and reduces administrator management burden.
Long Range PoE Distance Extension, up to 200 Meters
The long range mode provides extended power and data delivery distance to up to 200 meters while general Ethernetswitches have a distance restriction of 100 meters. The longrange mode operates on a per-port basis at 10Mbps full-duplex operation, ideal for devices such as IP cameras,IP phones and PoE-enabled IoT devices at a remote location.
Dual Firmware
The dual firmware feature allows switches to have two firmware in storage. You can denote one of these firmware asthe active one and the other firmware as the backup. If the active firmware faces problems, you can activate the backup firmware right away to reduce down time.
Voice VLAN
Voice VLAN is a special function of GS-5416PLC switch which allows network administrator to easily prioritize IP voice traffic from IP phone through the access port of switch to enhance VoIP service. Voice VLAN also provides QoSto VoIP, ensuring that the sound quality of an IP phone doesnot deteriorate when the IP voice traffic is sent unevenly.
DHCP Snooping
The network security feature of DHCP snooping enables theprevention of malicious or malformed DHCP traffic or the mitigation of security risks from rogue DHCP servers. The feature monitors DHCP messages received from untrusted devices connected to a switching device in the network and protects the integrity of legitimate DHCP server and its operations.
Smart Tools for Improved Network Efficiency and Security
The switch features smart and simple network monitoring tools that allow for improved network efficiency and security. The web-based interface management features include QoS (Quality of Service) bandwidth control for better traffic control, VLAN (Virtual LAN) for enhanced network security and multicast IGMP snooping v1/v2/v3 for streaming applications. For quick and easy setup, the web-based management integrates advanced management and security functions of Access Control List (ACL), CoS, STP, IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror.
OPTIONAL ACCESSORY
1000Base-T SX LX SFP ModulesHARDWARE | |
Ports | 16 x RJ45 10/100/1000Base-T Gigabit ports |
Transmission Method | Store and forward |
Buttons | Reset button |
LED Indicators | Per Port: Link/Act |
Power Input | 100-240V AC, 50-60 Hz, internal power supply |
Fan | 2 x Fans with hot-swappable fan tray |
Surge Protection | Support 6KV surge protection on RJ45 port (port21-24) |
Dimensions (L x W x H) | 441 × 197 × 45 mm |
Weight | 3.20kg |
PERFORMANCE | |
Switching Capacity | 40Gbps |
Forwarding Rate | 35.7 Mpps |
MAC Address | 8K |
Buffer Memory | 1M bit |
Jumbo Frames | 9K |
Filtering/Forwarding Rates | 1000Mbps port - 1,488,000pps |
POWER OVER ETHERNET | |
Standard | IEEE 802.3af (PoE), IEEE 802.3at (PoE+) |
Power Output | Up to 30W per port |
Pin Assignment | 1/2(+), 3/6(-) End-Span (mode A) |
Available Power Budget | 280W |
Management | PoE status, PoE on/off, PoE PD alive check, perport priority setting |
Long Range | Enable long range mode at 10Mbps for cable distance up to 200 meters |
Backfeed Protection | Built-in |
SMART FEATURES | |
Quality of Service (QoS) | Rate limiting on packets sent and received by an interface |
Class of Service (CoS) | IEEE 802.1p class of service (SPQ, WRR) |
Spanning Tree | IEEE 802.1d Spanning Tree Protocol (STP) |
VLAN | Up to 200 VLANs and 4096 VLAN IDs |
IPV6 | IPv6 over Ethernet (RFC 2464) |
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Copyright 2024 MyDeal.com.au - © All rights reserved