Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!
It's fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimise flex and twist. The control surfaces are something else - the elevator, rudder and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls 'Snap' and control response is instantaneous.
The light - yet rigid - airframe adds up to one great flying 3D 'foamy'. Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!
Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.
This is a great model for general park flying and hardcore 3D. You will be hard pressed to break this model, it will take hard knocks and just keep bouncing back everytime!
Features:
• Tough EPP material, light-weight and crash resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D manoeuvrability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation
Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)
Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7/11x4.7 propeller
4 x 9g servos
Returns Policy
Customers may return items to warehouse for a full refund of the product cost if they are dissatisfied. This must be done within 30 days from the date of purchase, and the item must be in a good condition.
HobbyKing.com Service Centers don’t accept crash, damaged parts of the items due to misuse, and items that have been modified.
Photos and/ or videos are required for Initial Evaluation (submission via RMA). All types of FAULTY batteries are NOT required to be returned to warehouse. Photos and/ or videos are enough to justify the fault of the item.
For re-sending of items via RMA, the RMA form MUST be printed and attached on the parcel.
After submitting the RMA form, if we receive no response from your end within 45 days or once the parcel is required to send back but it is not returned to our warehouse within 45 days, it will subject to rejection of RMA application.
If HobbyKing cannot provide the replacement parts or item, the customer must return the product (in full) before they are elligable to receive a refund.