iCarsoft i950 for Fiat Alfa Romeo OBD2 OBDII Diagnostic tool Fault Code Reader

Best Brand of iCarsoft with outstanding features for the maintenance of your vehicle. It will enable you to read and clear diagnostic faults from main systems within your Fiat/Alfa Romeo such as SRS airbags, ABS Antilock Brakes, engine & transmission modules.

iCarsoft i950 OBD2 OBDII Fault Code Reader is Multi system diversified Scanner diagnose full system. It’s a most influential DIY tool that comprise KWP2000, CANBUS, J1850, ISO9141, etc test modes. It enables technicians and end users to accurately diagnose complex problems.

Features for Fiat/Alfa Romeo

• It can Read DTCs

• It can Clear all DTCs

• Read live data stream thoroughly

• Compatible with all Models of single brand (OBDII-16 DLC)

• Diagnose Full system

• Can be Upgrade via USB 2.0

• Supports Multi languages

It can Read and Erase all trouble codes

Read Data Stream Efficiently

I/M Readiness: I/M Readiness designate emissions related systems functionality on the car and are ready for Inspection and Maintenance testing.

Freeze Frame: When any error occur related to emission, certain car conditions are recorded by the on board computer. This information is denoted as freeze frame data. Freeze Data is a snapshot of the working conditions at the time of an emission related fault.

O2 Sensor Test: This test depicts the recovery and viewing of most recently performed tests on cars’s on board computer

On Board Monitoring: To read the results of on board diagnostic monitoring tests for specific components and systems this function can be efficiently utilized.

Evap System Test: This function makes you able to start a leak test for the car’s EVAP system. Before using the system test function, please concern with car’s service repair manual to regulate the procedures essential to stop the test.

Vehicle Information: This vehicle identification number (VIN) and the calibration verification number (CVN) are shown in this option along that all other information of the test vehicle.

Retrieve generic codes (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and awaiting codes

Check Engine Light (MIL) can be turned off through this option and it can also clear codes and reset monitors

It can read live PCM DataStream

Support CAN (Controller Area Network) and all other protocols

Multilingual menu and DTC definitions- English, Spanish, and German, etc

Read pending and permanent DTCs

DTCs search

Tested data playback

• Display: 2.8” Color screen, 320 x 240 pixels display with contrast adjustment

• Operation Temperature: 0 ℃ -- 50 ℃

• Storage Temperature: -20 ℃ -- 70 ℃

• Power: 9V -- 18V

• Operating current: 100mA@12V (Typical)

• Power consumption: 1.2W (Typical)

• Dimension: 121mm*86mm*26mm

• Weight: 300g

• Hardcopy User’s Manual

• 6-foot OBD II cable

• USB cable

• Nylon carry case

Support Multi Languages:

• English

• German

• Spanish

• French

• Portuguese

• Russian

• Dutch