ICARSOFT LR V2.0For LAND ROVER JAGUAR DIAGNOSTIC SCAN TOOL 2021 EXTRA FEATURES

ICARSOFT LR V2.0For LAND ROVER JAGUAR DIAGNOSTIC SCAN TOOL 2021 EXTRA FEATURES

 

iCARSOFT AUTHORISED , WARRANTY, BUY GENUINE


SAMEDAY FREE DISPATCH!

LATEST iCarsoft LR V2.0 Professional Multi-system Auto Diagnostic Scanner Tool 

For LAND ROVER, RANGE ROVER, JAGUAR

 Updated 2020 version For iCarsoft LR II & All Future Updates Are Free For Life

 

iCarsoft LR V2.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc. With a 4.0” TFT LCD and unique diagnostic software, it features

 full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850etc.Itenables technicians to accurately diagnose complex problems.

 

Based on LR II, more functions are added to LR V2.0:

ABS Bleeding

Injector Coding

BMS reset

Battery Voltage Test

Data Print

 

Notice:

iCarsoft LR V2.0 scanners just work on LandRover/Jaguar with OBD II protocol,

if your vehicle were produced before 2004 year or after 2014 year, please kindly confirm with us about the compatibility before purchasing !

If you want to test some specific functions, please kindly confirm with us, thank you !

 

Product Features:

  1. iCarsoft LR V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
  2. Applies to the single Brand of most models of LR which equipped with OBDII-16 DLC
  3. Support OBDII/EOBD Ten Modes of Operation
  4. Full System Diagnosis
  5. Read &Clear DTC
  6. Read Live Data
  7. Support Data Review
  8. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  9. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
  10. DTC Library to lookup when user is operating this tool.
  11. Easy To Use With Silicone Keys
  12. Full Speed Upgrade Via USB2.0
  13. 4.0TFT LCD, 480*320 Pixels
Multi-language: 
English, French, Deutsch, Spanish, Dutch, Italian, Czech, Hungarian, Polish, Swedish, Finnish, Portuguese, Russian, Danish, Norwegian

 

Special functions:

*** Varies across year and model ***

Oil Service Reset Function

The LR V2.0 allow you to reset Oil Service in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.


 EPB Reset Function:

This electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systems safely and effectively.

The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.

DPF Regeneration or Replacement

Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot.

SAS Reset Function

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting.  A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. The iCarsoft LR V2.0 will allow you to carry out steering angle re-calibration on supported models.

ETCs Reset Function

Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.

BMS Reset Function

Battery Management System (BMS), registers new battery to the BMS while battery replacement.

ABS Bleeding
ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.

Injector Coding

Injector coding, relearn the injector control parameter while the injector renewed or replaced

 

SPCIFICATIONS:

Display: 4.0TFT LCD, 480*320 Pixels

Operation Temperature: 0°C ~ 50°C

Storage Temperature: -20°C ~ 70°C

Operating Voltage: 9 ~ 18V

Operating Current: 150mA@12V(Typical)

Power Consumption: 1.8W(Typical)

Dimension: 206*104.1*32.6 mm (L x W x H)

 

LR V2.0 vehicle coverage of LandRover/Jaguar:

(If your vehicles are before 2004 year, please make sure your vehicles are OBDII compliant firstly)

Range Rover 1995-2002(P38), 2002-2005(L322), 2006-2015

Range RoverSport    2005-2015

Range RoverEvoque  2012-2015

Discovery I         1995-1999   

Discovery II         1999-2004

DiscoveryIII         2005-2009

Discovery           2010-2015

Freelander          1997-2014

Defender           1997-2012

 

CONTENTS:

LR V2.0 Main Unit

Main Cable

Data Cable

TF Card

User Manual

Nylon carry case

 

GTIN: 0737278989507

Shipping Details

  • Please allow 2-8 business days for delivery
  • We ship across Australia including major cities like: Sydney Melbourne Perth Brisbane Adelaide Canberra Newcastle and the Gold Coast
Refund Guarantee Icon
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee Learn More
Sold & shipped by LiFaFa Pty Ltd

More from this brand

Reference ID: 3913340

Reviews (0) Add Review

No reviews yet