LF0.8SN100C.5K NIHON SUPERIOR 0.8Mm Lead Free Solder 500G Nihon Superior Sn100c 0.8MM LEAD FREE
Successfully Tried and Tested
Leading electronics manufacturers throughout the world have used SN100C with outstanding results. To date, millionsof circuit boards have been assembled with the SN100C familyof solders in all types of products. Many of the devices soldered with SN100C already have been in use for several years.
Nihon Superior have developed SN100C 030 solder wire. One of its major points is that it is the only lead free alloy that looks and flows like normal tin/lead. SN100C is comprised of Sn/Cu/Ni + Ge. (TIN, COPPER, NICKEL & GERMANIUM)
The flux-cored solder wire enables fast soldering with less carbonizing of soldering tip and less flux spatter providing greater productivity than existing products.
SN100C (030) lead-free flux-cored solder wire provides sharp spreading and good separation.
The high-reliability alloy suits fine-pitch application. It contributes to higher economic productivity with its improved efficiency over conventional products.
SN100C (030) also reduces bridging in soldering extra-fine coaxial harnessing in cell phones.
The alloy (Sn0.7Cu0.05Ni Ge) has a 0.1-mm diameter. SN100C (030) inhibits growth of the intermetallic layer and lowers copper erosion. Its highly ductile properties accommodate for strain on joints.
Key Benifits Include:
Material Property | SN100C | Test method | |
Melting Temperature [°C] | Solidus_ 227 | Ramp ratefor different thermal analysis__ 20°/min | |
Liquidus 227 | |||
S.G. | 7.4 | S.G. measuring apparatus 25° | |
Specific Heat | 220 | Estimated value | |
Thermal conductivity | 64 | Estimated value | |
Vickers Hardness | Slow cooling | 16.1 | Cast onto aluminum plate |
Fast cooling | 12.9 | Cast onto insulating brick | |
Tensile strength | 32 | 10mm/min. (25°) | |
Elongation [%] | 48 | 10mm/min. (25°) | |
Electrical resistance | 0.13 | For Terminal method (25°) |
_
Material Property | SN100C | Test method | |||
Coefficient_ of________________ Thermal Expansion | 30-80° | 1.33x10-3 | Conditions:_ Load: 10.0grams, sample ;Almina (20mm), Programmed temperature: 10°/min. | ||
80-130° | 1.38x10-3 | ||||
130-180° | 1.46x10-3 | ||||
Spread Factor % | 240° | 77 | JIS Z 3197 | ||
250° | 77 | ||||
260° | 78 | ||||
280° | 78 | ||||
Creep Strength (Time to Failure) | 145° | >300 hours | 145° load 1 kg | ||
150° | >300 hours | 150° load 1 kg | |||
180° | >300 hours | 180° load 1 kg | |||
Wettability Seconds | _ | Ta | Tb | Fmax | Wetting Balance
0.3 X 3.5 X 25 mm
Ta = Zero cross time
Tb = Wetting time
Fmax = Max. wetting force |
240° | 1.0 | 4.53 | 0.159 | ||
250° | 0.86 | 2.79 | 0.181 | ||
260° | 0.47 | 1.46 | 0.186 | ||
270° | 0.31 | 0.8 |
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Copyright 2024 MyDeal.com.au - © All rights reserved