Lithofin PRO Professional Impregnator Multi-Surface Pre-Sealer 5L Free & Fast Shipping

 Multi-Surface and Pre-Sealer   

• Protects Against General Staining
• Protects Against Oil and Grease
• Reduces Growth of Algea and Mildew 
• Easy-To-Use 
• Effective for Many Years
• Does Not Change Appearance 
• Does Not Change Surface Breathability
• Free Of Solvent - Not Flammable

 The solvent free Lithofin PRO is water based product, and it has different chemical properties than solvent based impregnators. Therefore, the application method differs from other impregnators. 

 Description 

Lithofin PRO is water based, solvent free impregnator developed to allow for easy application. The product is ready-to-use and contains water and oil repellent polymers and additives.  

 Technical Data: 

Density: 0,97 g/cm³

Appearance: liquid, clear, yellowish

Odour: nearly odourless

pH-Value: approx. 5,0

Flash Point: n.a.

Solubility in Water: --

 Properties

This special impregnator effectively protects ceramic tiles, porcelain tiles, terracotta, natural stone, engineered stone, clay and brick pavers and similar surfaces against the penetration of oil, grease, dirt and water, and it largely prevents staining. The product penetrates into the surface and forms an extremely thin, invisible film in the capillaries. The appearance of the treated surface is either unaffected or only slightly altered. 

 Field of Use 

Protective treatment for absorbent surfaces. Facilitates care and maintenance of surfaces in kitchens and bathrooms, on window sills, tables and all other stain sensitive areas. Suitable for indoor and outdoor use.

Please Note: the suitability of the product for marble and other acid sensitive stones with a polished surface and all types of fully vitrified ceramic tiles should be confirmed prior to use.  

Directions for Use 

The surface should be completely dry, clean and free of stains. Shake the bottle before use. Apply generously and evenly in undiluted form using a sprayer or a clean microfibre applicator. Highly absorbent surfaces should receive a second application after ca. 20 minutes. Avoid puddles and drips which should be wiped away immediately. Ensure that all surplus product is removed, do not allow it to dry on the surface. The full effect will be achieved after 48 hours. Keep the surface free of water and oil during this time. Clean all tools with water immediately after use. Please Note: some materials may appear slightly darker after treatment. If no prior product experience exists or in cases of doubt, we recommend a trial application. Always treat the entire surface in a room. The product does not protect against acid ingress. Remove splashes on wood, glass, PVC, lacquered surfaces and mastic filled joints with a cloth. The temperature of the surface to be treated should be between 10°C and 25°C. Coverage: approx. 10m² per litre on rough limestone, up to 20m² on polished, dense natural stone. Up to 40m² per litre on porcelain tiles. 

 Storage 

Keep closed, cool and dry. Frost-free. Shelf life of approx. 12 months. Open containers should be used quickly. 

 Environmental Protection 

The contained surfactants are biologically degradable according to EU-regulations. Does not contain any solvents. Disposal: containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems. 

Safety 

Contents: 2-propanole (10% to 30%); auxilliary agents. General Information: keep out of the reach of children. Treated surfaces present no health hazard once dry. First Aid Procedures: remove contaminated soaked clothing immediately. In case of inhalation ensure fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. Do not induce vomitting. If swallowed by mistake drink plenty of water and seek medical treatment. Emergency Procedures: in case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure adequate ventilation. Product doeas not burn, fire-extinguishing activities according to surrounding. ADR2003: not a dangerous good.