Lockwood Padde Electric Strike ES150-1 12V Fail Safe Weather Resist Rim Mounted

Padde By Lockwood ES150-1 Series Surface Mounted Electric Strike
100151-010

NOTE: This is a non-stocked item and has a handling time of ten(10) business days after payment has been cleared. Please DO NOT purchase if you require this item urgently.

ES150 is a surface mounted electric strike suitable for use with rim or surface type dead latches. This strike is easy to install and can be simply controlled by a keypad, keyswitch or integrated into any access control system. 

ES150 offers high levels of security and features usually provided by more expensive electric locking solutions. The electric strike can be easily installed on steel and wooden door frames. A Weather resistant version is also available for exterior applications.

Features:
Configure to fail safe or fail secure
Easy installation suitable for steel and wooden door frames
Stainless steel striker for extra strength and durability
Available in 12 or 24Vdc
Solenoid rated for continuous use
IP56 weather resistant version available
TRICARE® 5 Year Warranty

Applications:
Surface or rim mounted applications
Suitable for use with all access control systems
Exposed areas

Standards and Compliance:
CE Approved
C-Tick Certified
Weather Resistant (IP56)

Specifications:
Voltage: 12Vdc
Current: 243mA @ 12Vdc
Solenoid: Solenoids are rated for continuous use.
Monitoring: None
Holding Force: 680 kg Static Strength Rating
Endurance: Cycle tested to 1,000,000 operations
Environment: Operational temperature range -20°C to + 60°C, Weather resistant construction Standard. (IP56)
Body: Solid Stainless Steel Construction
Keeper: Stainless Steel

Specification Statement:
The electric strike must be suitable for surface mount applications for use with rim or surface mount door locks. Where Power To Lock and Power To Open functions may be required in the same building, an individual strike is interchangeable from either "Power to Lock" or "Power to Open" on site.

The electric strike should not consume current greater than 243mA @ 12Vdc or 187mA @ 24Vdc. Certifications must include CE and C-Tick.

The strike should be tested to 1 million operations and have a minimum holding force not less than 680kg.