Metabo AU62004840 Screwdriver Kit With Magazine 18V 4000rpm SE 18 LTX 4000 4.0 K AU62004840

• Drywall screwdriver for gypsum plasterboards on wood and metall substructure; also for gypsum fibre boards to metal framework
• Compact and light design for comfortable single-hand use
• Precise driving of screws by virtue of finely adjustable depth guide and low-noise claw coupling
• Depth guide can be fully removed for inspection during operation
• Vario (V)-electronics for working with customised speeds for the materials used
• Integrated working light to illuminate the work site
• Battery packs with capacity display for checking the charge status
• Ultra-M technology for highest performance, gentle charging, optimum energy utilisation and long service life.

• Voltage 18 V
• Maximum torque Soft 7 Nm
• No-Load Speed 0 - 4.000 /min
• Bit retainer Hexagon recess 1/4" (6.35 mm)

Metabo 18V LiHD Battery Pack 4.0Ah

• LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
• Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
• Patented "AIR COOLED" charging technology
• Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
• Processor-controlled charge and discharge management
• Capacity display with almost no self-discharge
• One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com

• Voltage 18V
• Capacity 4 Ah
• Weight 0.6 kg

Metabo 36V Superfast Charger ASC 30-36V​

• Monitored charging with microcontroller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

• Voltage 30-36V