MZMing [6 Pack] Ø10 x 100mm Concealed Floating Shelf Bracket Wall Mounted Shelving Brackets and Supports - Heavy Duty Invisible Bracket Hidden Shelf Supports for DIY Custom Wall Floating Board Shelves

Brand: MZMing

Color: Brown

Features:

• 【Concealed Fixing Brackets】: Can be used for DIY or custom ledges, completely hidden in walls and planks, simple and fashion, making your home more beautiful and orderly.
• 【Material】: The interior of the floating shelf support is made of iron, its case and expansion tube are made of plastic. It is fine workmanship and durable.
• 【Dimensions】: Total length is 175mm, the length of expansion tube is 75mm, diameter is Ø12mm, and the length of support rod is 100mm, diameter is Ø10mm.
• 【High stability】: The support rod is a hexagonal cylinder with barbs, which increases obstruction to the board and improves stability.
• 【Strong load-bearing】: The load-bearing capacity of the wall mounted shelf support is very strong. If properly installed on a suitable fixed brick wall, the holder can bear about 45 lb/20 kg.

Details: [Name]: Heavy Duty Wall-Mounted Hidden Brackets and Supports Nail for Floating Shelves [Material]: Metal (Iron) + Plastic [Color]: Brown [Weight]: 50.58 g [Size]: Ø10 mm x 100 mm [Dimension]: Total length: 175 mm Expansion Tube length: 75 mm, diameter: Ø12 mm Support Rod length: 100 mm, diameter: Ø10 mm [Package]: 6 X Concealed Floating Shelf Bracket The Plank Support Bracket can support and fix all kinds of wall shelves, such as bookshelves, display stand, garage storage racks, decorative shelves, bathroom shelf, shoe shelving, etc. It can definitely satisfy your various DIY wall bracket designs. Installation Steps: 1. First measure the hole spacing and drill the hole in the wall, the depth of the hole should not exceed 75mm. 2.Insert the expansion end of the bracket support pin into the wall hole together with the black screw cap at the end. 3. Insert the support rod into the expansion plug of the wall hole. After the screw end is properly contacted with the screw cap and tightened clockwise, continue to rotate until the expansion plug in the wall expands to fully support the wall. 4. Then drill the hole of the corresponding size on the side of the board (consistent with the hole spacing of the wall). 5. Finally, insert the board to the plank support rods. Please Read The Following Tips: 1. You need to prepare a 12mm drill bit for drilling holes in the wall and another 10mm drill bit for drilling holes in the wood. 2. Remember to place the middle silver metal ring on one side of the expansion tube and embed into the wall. 3. Each board must have at least 2 invisible brackets and be kept in the same horizontal position.

Package Dimensions: 7.6 x 4.1 x 0.8 inches