Works on 1996 or newer OBD 2 / EOBD / JOBD compliant cars and trucks
Reads diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database)
Clears trouble codes and turns off the MIL ("Check Engine" light)
Set the maximum number of responses to obtain
Remove spaces from ECU responses (to speed data transmission)
Store a unique identifier in EEPROM
Set the CAN mask and filter with one command
Easily switch between variable and fixed CAN message lengths
Send CAN remote frames (RTRs)
Displays current sensor data, including:
* Engine RPM
* Calculated Load Value
* Coolant Temperature
* Fuel System Status
* Vehicle Speed
* Short Term Fuel Trim
* Long Term Fuel Trim
* Intake Manifold Pressure
* Timing Advance
* Intake Air Temperature
* Air Flow Rate
* Absolute Throttle Position
* Oxygen sensor voltages/associated short term fuel trims
* Fuel System status
* Fuel Pressure
* Many others...
Model: ELM327
Material: ABS
Wireless Bluetooth: Yes
Bluetooth Transmit Range: 10m
Diagnose Interface: 16 pin
Language Supported: English
Software Platform Supported: DOS & Windows
Supports protocols as follows:
* ISO15765-4 (CAN)
* ISO14230-4 (KWP2000)
* ISO9141-2)
* J1850 VPW
* J1850 PWM
Output Protocol: Serial RS232
Baud rate: 9600 or 38400
Indicator LEDs: OBD output/input (Tx/Rx), RS232 output/input (Tx/Rx)
Working voltage: 12V
Working Current: 45 mA
Size: 7 * 4.5 * 2.4cm
Not compatible with iPhone
No adapter or batteries needed. Take its power directly form the vehicles OBD2 plug
Please check your car to make sure it comes with standard 16Pin OBD2 interface and Vehicle
Emission Control unit (ECU) information Label must state that the vehicle is OBD II compliance.
1 x ELM327 Bluetooth Diagnostic Tool