Offering high-end performance at affordable cost. Think of TOA when you need amplifiers for commercial audio applications.
TOA's P2240 Power Amplifier is designed to complement the A2000 Series of Mixer Power Amplifiersand is consequently a highly cost effective solution to the demands of PA applications. Features such as front bass, treble and volume controls and a 100 volt line input enures its versatility and adaptability to situations where a booster amplifiers is needed. The 100 volt line input allows it to be aded to the end of an existing 100 volt speaker line or used on the high impedance speaker output of a mixer amplifier.
P2240 Power Amplifier Features:
The P-2240 offers a high performance-to-cost ratio, andcan be used with TOA's A-2000 Series mixer power amplifiers. Because the P-2240 features
a 100V line input, it can be connected to the speaker line from another amplifier. Also, the P-2240's power can be switched on and off by remote control, allowing it to be operated independently of the A-2000 Series.
High cost-performance
Flexibility
Easy to handle
Model No. | _A-2030_ | A-2060_ | A-2120_ | A-2240_ | P-2240 |
Power Source_ | 220 - 240V AC or 24V DC | ||||
Rated Output_ | 30W_ | 60W_ | 120W_ | 240W_ | 240W |
Power Consumption | 34W (EN60065), 78W (AC operation atrated output), 2A (DC operation at rated output) | 72W (EN60065), 150W (AC operation at rated output), 4A (DC operation at rated output) | 124W (EN60065), 260W (AC operation at rated output), 8A (DC operation at rated output) | 238W (EN60065), 520W (AC operation at rated output), 15A (DC operation at rated output) | 238W (EN60065), 520W (AC operation at rated output), 15A (DC operation at rated output) |
Frequency Response_ | 50 - 20,000Hz (±3dB) | ||||
Distortion_ | Under 1% at 1kHz, 1/3 rated power | ||||
Input MIC_ | MIC 1 - 3: -60dB*, 600, electronically balanced, XLR3-31 type AUX 1, 2: -20dB*, 10k, unbalanced, RCA pin jack Mute: Contact screw terminal (for MIC 1) | Line in: 0dB*, 10k, balanced, screw terminal 100V line in: 40dB*, 330k, unbalanced, screw terminal Power remote control: Make contact | |||
Output - Loop out | — | — | — | — | 0dB*, 10k, balanced, screw terminal |
Output - Speaker out | Balanced (floating) | Balanced (floating) | Balanced (floating) | Balanced (floating) | Balanced (floating) |
Output - High impedance | 330 (100V), 170 (70V) | 170 (100V), 83 (70V) | 83 (100V), 42 (70V) | 42 (100V), 21 (70V) | 42 (100V), 21 (70V) |
Output - Low impedance | 4 (11V) | 4 (15.5V) | 4 (22V) | 4 (31V) | 4 (31V) |
Output - Rec. out | 0dB*, 600, unbalanced, RCA pin jack | 0dB*, 600, unbalanced, RCA pin jack | 0dB*, 600, unbalanced, RCA pin jack | 0dB*, 600, unbalanced, RCA pin jack | — |
Phantom Power | _DC +21V (MIC 1)_ | — | |||
S/N Ratio_ | Over 60dB | ||||
Ventilation_ | —_ | Fan cooling | |||
Tone Control_ | Bass: ±10dB at 100Hz/Treble: ±10dB at 10kHz | ||||
Muting_ | MIC 1: Mutes other input signals by 0 - 30dB attenuation | — | |||
Indicator_ | Power. signal, peak | ||||
Finish_ | Panel: ABS resin, black/Case: Steel plate, black | ||||
Dimensions_ | 420 (W) × 100.9 (H) × 280.3 (D)mm | _420 (W) × 100.9 (H) × 360.3 (D)mm | _420 (W) × 100.9 (H) × 351.3 (D)mm | ||
Weight | _5kg_ | 7kg_ | 10.8kg_ | 13.2kg_ | 13.2kg |
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.