The Phantom is the newest addition to our range of First Person View (FPV) models. It is a great flyer with very predictable handling qualities, excellent stability and lots of wing area to cope with additional loads for FPV use.
The Phantom features tough EPO construction with moulded in camera bays - one forward looking just under the nose and another mount in the top of the canopy with a plywood support pre-installed. This updated version features premium 3K wrapped carbon tube spars, and now breaks down into three pieces for easy transport.
Assembly of the airframe is very simple, literally four glue joints required - foam glue is also included!
This being the kit version you will require your own choice of 9gram servos, motor and speed controller - we suggest a low current power system not exceeding 30 amps, this will provide you with flights in excess of 30 minutes on a 3s 4500mAh lipo.
FPV pilots will appreciate the space under the canopy - it's cavernous! There is plenty of space for your choice FPV gear.
Features:
• Kit Version - Assemble and install your choice of electronics
• Ultra though EPO construction
• Ultra stable flight performance
• Excellent FPV platform
• 30 minute plus flight duration on 4500mAh 3s lipo
• Easy to Hand Launch, Easy to Land
• Stable Handling at Low and High Speeds
• Updated with 3K wrapped carbon tube spars
• Updated with removable outer wing panels for easy transport
Specs:
Wingspan: 1550mm
Length: 683mm
Flying Weight: 900g
Requires:
4 Channel Radio (with delta mixing)
3S 11.1V 4500mAh Lipoly battery
2 x 9g servos
30amp Esc
900kv Brushless Outrunner Motor
Returns Policy
Customers may return items to warehouse for a full refund of the product cost if they are dissatisfied. This must be done within 30 days from the date of purchase, and the item must be in a good condition.
HobbyKing.com Service Centers don’t accept crash, damaged parts of the items due to misuse, and items that have been modified.
Photos and/ or videos are required for Initial Evaluation (submission via RMA). All types of FAULTY batteries are NOT required to be returned to warehouse. Photos and/ or videos are enough to justify the fault of the item.
For re-sending of items via RMA, the RMA form MUST be printed and attached on the parcel.
After submitting the RMA form, if we receive no response from your end within 45 days or once the parcel is required to send back but it is not returned to our warehouse within 45 days, it will subject to rejection of RMA application.
If HobbyKing cannot provide the replacement parts or item, the customer must return the product (in full) before they are elligable to receive a refund.