iCarsoft VOL V2.0 DPF OBDII Multi System Auto Diagnostic Tool for Volvo/Saab

iCarsoft VOL V2.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc. With a 4.0” TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850etc.It enables technicians to accurately diagnose complex problems.

Based on VOL II, more functions are added to VOL V2.0:

BMS reset

Battery Voltage Test

Data Print

Notice:

iCarsoft VOL V2.0 scanners just work on Volvo/Saab with OBD II protocol,

if your vehicle were produced before year2005 or after year 2014, please kindly confirm with us about the compatibility before purchasing !

If you want to test some specific functions, please also kindly confirm with us before purchasing, thank you !

• iCarsoft VOL V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
• Applies to the single Brand of most models of Volvo/Saab which equipped with OBDII-16 DLC
• Support OBDII/EOBD Ten Modes of Operation
• Full System Diagnosis
• Read &Clear DTC
• Read Live Data
• Support Data Review
• The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
• Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
• DTC Library to lookup when user is operating this tool.
• Easy To Use With Silicone Keys
• Full Speed Upgrade Via USB2.0
• 4.0″TFT LCD, 480*320 Pixels
• Multi-language: English, German, Dutch, Spanish, French.

*** Varies across year and model ***

Oil Service Reset Function

The VOL V2.0 allow you to reset Oil Service in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.

EPB Reset Function:

This electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systems safely and effectively.

The applications include deactivating/activating the brake control system, assisting with brake fluid control, brake diagnostics, opening and closing brake pads, setting brakes after disc or pad replacement and also reading and clearing EPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.

DPF Regeneration or Replacement

Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot.

SAS Reset Function

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting.  A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. The iCarsoft VOL V2.0 will allow you to carry out steering angle re-calibration on supported models.

ETCs Reset Function

Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replace the throttle valve.

BMS Reset Function

Battery Management System (BMS), registers new battery to the BMS while battery replacement.

Display: 4.0″TFT LCD, 480*320 Pixels

Operation Temperature: 0°C ~ 50°C

Storage Temperature: -20°C ~ 70°C

Operating Voltage: 9 ~ 18V

Operating Current: 150mA@12V(Typical)

Power Consumption: 1.8W(Typical)

Dimension: 206*104.1*32.6 mm (L x W x H)

VOL V2.0 Main Unit

Main Cable

Data Cable

TF Card

User Manual

Nylon carry case