Progear 20 E-Mojo Electric Hybrid Cross Bike Black

Specifications:

• Progear 20 E-Mojo Electric Hybrid Cross Bike Black
• The comfortable 700c tyres along with fenders and rear alloy rack ensure comfortable city and cycle path cycling
• SR-Suntour Pre-load and Lock Out forks further add to your comfort
• Power from the Bafang electric motor will assist your pedalling to get you there and back again
• Reliable Tektro Hydraulic Disc brakes provide all the stopping power needed
• The alloy frame, rims and components make the Progear E-Mojo light weight but with the strength where needed
• The Mid Drive Bafang motor is 26v/250w and limited to 25km/h ensuring Australian Standards compliance
• Mid drive motor powers through the drivetrain (transmission) of the bike which enables the motor to help with long & steep climbs and power up to high speeds on flat roads
• The lower centre of gravity also provides better handling, easier to lift on and off a bike rack and removal of either wheel is easier
• Frame: Alloy x6 700C
• Frame size: 20"
• Suspension fork: SR-Suntour NEx-HLO-DS700, front suspension pre-load adjustable coil, 700C with HLO lock-out
• Handlebars: Alloy
• Rear derailleur: Shimano Altus RD-M370-SGS 9-SP
• Chain wheel & crank-set: Bafang 3/32" x 38T, Alloy 170mm cranks
• Chain: KMC 1/2" x 11/128" x 118L
• Front Hub: Quando Alloy one piece forged with disc brake mount and quick release
• Rear Hub: Quando Alloy one piece forged with disc brake mount and quick release
• Brakes: Tektro hydraulic disc brake. F/R Disc brake. Cast Alloy lever and bracket TR160-7
• Tyre: 700C x 38C 30TPI A/V
• Rim: Alloy 700C with eyelet
• Right shifter: Shimano Altus SL-M370 rapid fire plus 9-SP
• Freewheel: Shimano Acera CS-HG300 11-34T 9-SP index
• Stem: Alloy with Alloy spacers
• Grip: Rubber 130mm
• Bell: Nuvo Allo & plastic bell
• Saddle: Velo comfort double density, chromoly rails, ArcTech zone cut with Alloy clamp
• Seat post: Alloy with clamp
• Pedals: VP Steel cage, 9/16" CR-MO axle
• Mudguard: SP-50A-700C-1A-3F F/R 700C
• Rack: Alloy rear rack
• Kickstand: Alloy with plastic end cap
• Battery: Phylion 36V/11.6Ah, Panasonic 2900mAh cell, with intelligent protection board, with communication
• Display: Bafang LCD display, DC 36V, 0-5 modes, UART communication, with walk boost, with light switch
• Speed sensor: Sensor, 1 pulse, 5V, 500mm
• Charge: Phylion GS CE 100-240V 1.6A(MAx)50/60HZ Output: 42V 2A
• Motor: Bafang MAx-01 drive system 36V/250W, Limit 25km/h, CL:49mm with controller, with battery communication
• Cable: 600mm
• Lifetime frame and fork warranty
• 12 Month part replacement warranty
• Note: This bicycle comes partially assembled with manual included. In addition to assembly, brakes and gears will need adjusting. We recommend assembly being done by an experienced bicycle mechanic