Progear E-Shock 9 Speed Electric Mountain Bike 16in

Specifications:

• Progear E-Shock 9 Speed Electric Mountain Bike 16in
• The 27.5" tyres roll over obstacles more easily, have a smoother ride uphill or down, provide more traction and once moving are easier to stay moving
• In short, they will take you anywhere, and the extra power from the Bafang electric motor will get you there and back again
• Reliable Tektro hydraulic disc brakes provide all the stopping power needed
• The alloy frame, rims and components make the Progear E-Shock light weight but with the strength where needed
• The mid drive Bafang motor is 26v/250w and limited to 25km/h ensuring Australian Standards compliance
• Mid drive motor powers through the drivetrain (transmission) of the bike which enables the motor to help with long & steep climbs and power up to high speeds on flat roads
• The lower centre of gravity also provides better handling, easier to lift on and off a bike rack and removal of either wheel is easier
• Frame size: 16"
• Frame: Alloy x6
• Suspension fork: SR-Suntour xCT HLO-DS27.5 , front suspension pre-load adjustable coil with HLO lock-out
• Handlebars: Alloy
• Rear derailleur: Shimano Altus RD-M370-SGS 9-SP index
• Right shifter: Shimano Altus SL-M370 rapid fire plus 9-SP 2050mm
• Chain wheel & crank-set: Bafang 3/32 x 38T with alloy cranks
• Chain: KMC 1/2" x 11/128" 116L 9-SP
• Front Hub: Quando Alloy one piece forged with disc brake mount and quick release
• Rear Hub: Quando Alloy one piece forged with disc brake mount and quick release
• Brake: Tektro hydraulic disc brake. F/R Disc brake. Cast Alloy lever and bracket TR160-7
• Tyre: 27.5"x 2.1" 60TPI A/V
• Rim: Alloy 27.5"
• Freewheel: Shimano Acera CS-HG300 11-34T 9-SP index
• Headset: FSA Alloy
• Grip: Rubber
• Bell: Nuvo Alloy & plastic bell
• Saddle: Velo comfort double density, chromoly rails, ArcTech zone cut with Alloy clamp
• Pedal: VP Steel cage, 9/16" CR-MO axle
• Cover: 1-1/8"
• Battery: Phylion 36V/11.6Ah, Panasonic 2900mAh cell, with intelligent protection board, with communication
• Display: Bafang LCD display, DC 36V, 0-5 Modes, UART communication, with walk boost, with light switch
• Sensor: Sensor, 1 pulse, 5V, 500mm
• Charge: Phylion GS CE 100-240V 1.6A (MAx) 50/60HZ Output: 42V 2A
• Motor: Bafang MAx-01 drive system 36V/250W, Limit 25km/h, CL:49mm, with controller, with battery communication
• Lifetime frame and fork warranty
• 12 Month part replacement warranty
• Note: This bicycle comes partially assembled with manual included. In addition to assembly, brakes and gears will need adjusting. We recommend assembly being done by an experienced bicycle mechanic