Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life..
Intelli-Charge allows you to adjust and select the charge rate from as low as 2 Amps to best suit the size of your batteries.
The smaller models (7,10, 15A) can be used as a power supply which is great as a memory saver when changing your vehicle battery so you don’t lose important radio and computer information. You can also run 12V appliances direct from the battery clamps up to the rated output current, ideal for use around the house.
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
Control and monitor the charger’s performance from a remote control display, allowing the charger to be mounted out of the way and out of sight. The battery charger and remote are synchronised for operation either locally or by remote.
The temperature sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments.
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
TYPE | 7 stage |
INPUT | 240VAC, 50Hz |
INPUT POWER | 1488W |
OUTPUT VOLTAGE | 12V |
OUTPUT CURRENT | 2,6,12,,25,50A |
MINIMUM START VOLTAGE | 2.5V |
BACK DRAIN | 1mA |
CHARGE CONTROL | |
DESULPHATION | High Frequency Pulse charge up to 11V |
SOFT START | Half the rated set current up to 12V |
BULK | Set current up to: 14.1V (GEL) 14.4V (AGM) 14.7V (WET) 14.7V (CALCIUM) |
ABSORPTION | Constant voltage until current drops to: 2 Amp setting: 0.3A 6 Amp setting: 0.9A 12 Amp setting: 1.8A 25 Amp setting: 3.75A 50 Amp setting: 7.5A |
EQUALIZATION | Contact current (2.0-7.5A) up to 16V then hold for 1 hour or 12 hour timeout |
ANALYSIS | Monitors battery for 90 sec |
RECONDITION | Contant current (0.3-7.5A) for 4 hours limited to: 14.1V (GEL) 14.4V (AGM) 16V (WET) 16V (CALCIUM) |
FLOAT | 13.7V |
POWER SUPPLY | |
SETVOLTAGE | 13.8V |
MAXIMUM CURRENT | 50A |
BATTERY RANGE | |
DEEP CYCLE | 14-1000Ah |
AUTOMOTIVE | 80-6000CCA |
MARINE | 110-8300MCA |
TYPES OF BATTERIES | Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM |
SIZE (MM) | 270x81x168 |
WEIGHT | 3.0Kg |
Warranty Policy
Please refer to the product listing for specific warranty terms and period
Returns Policy
Any faulty or damaged stock received within 14 days will be replaced at no charge. If a product is deemed to be faulty after that time, the normal warranty conditions for that product will apply. It is the recipient's responsibility to cover all costs and to follow warranty instructions as stated for the product.
You are not entitled to a refund if you simply change your mind or make a wrong choice - so please choose carefully.
Except where required by law, all returned goods must be:
Extensively damaged packaging and/or missing parts (i.e. manuals, cables) upon return will incur a re-stocking fee. This fee will be deducted from the original transaction when items are returned for a refund or exchange.
The following items are not eligible for returns:
Please do not open the packaging of any articles sent incorrectly as it needs to be returned to us in its original condition. Please notify us of any mistakes or damages within 48 hours in order that the problems can be remedied at the earliest convenience.
If you return goods via Australia Post, please ensure you retain the appropriate proof of shipment as an item lost in transit to us will be deemed as unreturned. Please also ensure goods are adequately packaged to avoid damage during return transit.
We recommend that you insure your returned items for the full amount and/or select a trackable shipping method. WallCann can not be held responsible for returns lost in transit.
Products purchased in conjunction with a WallCann promotion, and subsequently delivered including a Free Gift, must be returned with that Free Gift to receive a full refund for the original item purchased. Should the original item be returned without the Free Gift, the value of the gift will be charged to the purchaser via the original payment method.