Qmobility Sit to Stand Body Support Lift Chair

Specifications:

• Qmobility Body Support Lift Chair - Sit to Stand
• Power AC 110/240V 50/60 Hz
• Weight 50kg
• Safe operating load 120kg
• Directions for use
• Secure QLift Chair by pressing down the safety brake on rear wheels.
• Draw the armrests completely to the back.
• Positioning the QLift Chair as close as possible to the user, matching user's seated height level, assist the user onto the QLift Chair.
• Activate the QLift Chair, using the built-in remote controller's Up and Down buttons.
• Usage Instructions
• Check the battery status of the lift.
• Assist user to an upright seated position, and slide the pull-out hip support seat underneath the user, making sure the fit is snug and comfortable.
• Place QTransfer Lift close to the user and press down on the breaks, to lock in position.
• Allow user’s feet to rest on the foot hold and adjust the knee rest to support user’s knees comfortably.
• Rest both armpits of the user on the torso support.
• Connect both ends of the ladder lock to the belt hook.
• Pull ladder lock tightly (downwards) on both sides of the user.
• Allow user to stretch their arms forward and grasp the support handles, allowing their chest to rest on the chest rest, then fasten the waist support across the back.
• Using the remote controller, switch on the QTransfer Lift and press the Up/Down controls to elevate the user to a comfortable position.
• Release the brakes and grasp the transfer handle to manoeuvre the QTransfer Lift to desired location(s).
• After transferring the user to their desired location, follow these instructions in reverse order for the user to alight from the QTransfer Lift.
  
• Charging
• The QTransfer Lift (fully charged) can be used up to 40 times before requiring another recharge.
• The battery needs to be recharged on a weekly basis, with each full-charging cycle taking 4 hours.
  
• Safety Precautions
• Please read all operational directions carefully before use.
• Ensure battery is charged in advance, before use.
• Please check all belts and accessories are safely and correctly attached, before use.
• Do not use on uneven or steeply sloped surfaces.
• Do not use unnecessary force or speed on the device, during transfer.
• In the case of an emergency during transfer, please utilise the emergency brake.
• Do not charge battery whilst in use.