Quad Ku Band Satellite LNB 10.7Ghz Strong

To receive satellite signals, you need a LNB (Low NoiseBlock). What this does is picks up all the signals being bounced off the dish and filters out selected frequencies and amplifies the frequencies you need. It then sends the required frequencies to the satellite decoder box.

The benefit of the Quad LNBF is an installation that istypically quicker, easier and cleaner than using separate components.

• Input: 11.7-12.75GHz
• Output: 1000-2050MHz
• L.O.: 10.70 GHz

• Input Frequency Range : 11.7-12.75GHz
• Local Oscillator Frequency : 10.7GHz
• Output Frequency : 1000-2050MHz
• Local Oscillator Stability : +/-3MHz (-40°C to +60°C)
• Local Oscillator Phase Noise :
  • <-50dBc @ 1KHz Offset
  • <-80dBc @ 10KHz Offset
  • <-95dBc @ 100KHz Offset
• Noise Figure @ 25°C : 0.8 dB (Typical)
• Cross-Polarity Isolation : 25dB (Typical)
• Image Rejection : 40dB (Minimum)
• Output VSWR : <2.0:1
• Conversion Gain : 55dB (Minimum)
• Gain Flatness : +/-0.5dB at 26MHz, 8dB over each IFband
• Output Spurious : <-60dBm
• Current Consumption : 240mA (280mA Maximum)
• Reflector Type : Optimized for Offset Dish with 0.45-0.70 F/D
• Working Temperature/Humidity : -30°C to +60°C / 0 to 100%
• Output Connector : 75Ohms F-Type x 2 (Female)
• Weight : 328g