QUEBECII Neets Control For Projector
THE ULTIMATE CONTROL OF PROJECTORS: Neets Control QueBec
Neets Control - QueBec II gives you the ultimate in simple and reliable projector control. All functions are automatic. When QueBec II detects a signal on either VGA or HDMI loop-through input, it issues a command sequence to the projector and screen. The projector turns on, the connected video source is selected, and the screen lowers into position. The presentation is ready to begin in seconds. When the presentation finished, the projector turns off and the screen lifts. QueBec II works with permanent stationary computers, personal laptops, and DVD/Blu-ray disc players.
QueBec II can be easily configured to function as a priority switch, changing the projector source input when anew signal is detected. For example, when making a presentation from a laptop computer using the VGA output, a video segment from a DVD player can be inserted using the HDMI output by simply turning on and starting the DVD. Whenthe video segment is over, turning off the DVD player automatically switches back to the VGA signal.
Set-up is quickly accomplished by connecting via USB to a computer running Neets Project Editor software. By accessing just a few pages, you can set command sequences for HDMI signal, VGA signal or no signal. All projector control commands are available through the extensive device driver library included with Project Editor. An extra input is provided if you want to add an external button to control projector AV mute or to mute an external amplifier.
Neets Control QueBec II is flexible and foolproof. Simply configure the functions, and then let QueBec II take over. It's the ultimate in intelligent and intuitive basic projector control.
Features
Loop-thru / signal sensing: | QueBec II |
| 1x VGA | |
| 1 x HDMI | |
| QueBec III | |
| 2 x HDMI | |
| Communication ports: | 1 x RS-232 (Tx) |
| 1200-115200Baud | |
| Data Bit: 7/8 | |
| Stop Bit: 1/1.5/2 | |
| or | |
| 1 x IR (emitter) | |
| Transmit 381 Hz 500 kHz | |
| Devices: 1 | |
| 1 x USB | |
| 3 x Inputs/Outputs | Inputs: |
| Sense Low: <1 VDC | |
| Sense High: >4 VDC | |
| Outputs: | |
| Type: Open drain | |
| Max Voltage: 24 VDC | |
| Max Current: 0.5 A | |
| Supply voltage: | 12 VDC (110 - 230 VAC adapter included) |
| Resolution: | Max VGA resolution: 2K+ (QWXGA) 2048x1152 HDMI: FullHD, Signal detection Using "Hot Plug" pins |
| NOTE: | Due to the voltage detetion, the use of HDMI converters such as DVI converters is not supported |
| Dimensions: | Width: 25 mm |
| Height: 125 mm | |
| Depth: 70 mm | |
| Weight: | 100 g |
| Conformity: | Approval: CE |
| IEC/ EN 61000-6-1 | |
| IEC/ EN 61000-6-3 | |
| Item number: | |
| Neets Control - QueBec II | 310-0011 |
| Neets Control - QueBc III | 310-0012 |
Q: How does VGA detection work?
A: The Neets Control QueBec detects a VGA signalby looking at the H sync pin in the VGA cable.
Q: What port has the highest priority?
A: The port that has detected a signal last. So disconnect the cable and reconnect it to get priority.
Q: The QueBec II never turns off the monitor when using a HDMI extender/switch, why?
A: When using an HDMI extender or a switch, the behavior of the "Hotplug" signal can be
changed by the extender or switch.
The problem is often that the extender/switch keep the "Hotplug" pin high all the time.
The only way to eliminate this problem is to change the order of the equipment like this:
Q: Can I use a HDMI extender/switch together withthe Neets Control QueBec II?
A: Yes, if the HDMI extender or switch passes the "hotplug" signal through. (Ask your supplier ofextender or switch)
Q: The QueBec does not detect a VGA signal. What is wrong?
A: The Neets Control QueBec need sync signal on HSync pin to detect a signal.
Check that you do get at picture on your Display.
Try to connect your source directly the Display, to see ifyou get connection.
The QueBec does not interfere with EIED communication.
If you have a long cable between then the PC and the Quebec the voltage can drop below the voltage the Quebec can detect.
Try to move the Quebec closer to the PC in order to see ifthis is your problem.
Q: What options does QueBec come in?
A: The Neets Control QueBec comes in 2 options.
Weight: 0.2780
Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.
No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.
Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.
RETURNS POLICY
To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.
Incorrectly Ordered/Change Of Mind:
Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.
A change of mind return will only be accepted if:
Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.
Faulty Items
We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.
Repairs
The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Copyright 2024 MyDeal.com.au - © All rights reserved