The Turnigy TrackStar range of Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions.
These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment. They are easy to maintain, just dry them out and give them a bit of lubrication and they’ll be ready for the next bush bash. This makes them ideal for use in scale boats or large scale rock crawlers, with the added advantage that they are much smoother at lower throttle inputs, which is handy in boats and a necessity in crawlers. These motors also contain an internal fan to assist in keeping motor temperatures down.
Sometimes old school has its advantages.
Always use with a suitable brushed ESC.
Specs:
Power: 80W
KV: 1778
Max Current: 58A
Lipo cell count: 2S
Resistance: 62m?
Shaft x Length: 3.175 x 16mm
Diameter: 35.8mm
Length: 57mm
Weight: 240g
Connection: 4.0mm
Bolt holes spacing: 25mm
Bolt thread: M3
Returns Policy
Customers may return items to warehouse for a full refund of the product cost if they are dissatisfied. This must be done within 30 days from the date of purchase, and the item must be in a good condition.
HobbyKing.com Service Centers don’t accept crash, damaged parts of the items due to misuse, and items that have been modified.
Photos and/ or videos are required for Initial Evaluation (submission via RMA). All types of FAULTY batteries are NOT required to be returned to warehouse. Photos and/ or videos are enough to justify the fault of the item.
For re-sending of items via RMA, the RMA form MUST be printed and attached on the parcel.
After submitting the RMA form, if we receive no response from your end within 45 days or once the parcel is required to send back but it is not returned to our warehouse within 45 days, it will subject to rejection of RMA application.
If HobbyKing cannot provide the replacement parts or item, the customer must return the product (in full) before they are elligable to receive a refund.