Waterpebble - Unqiue Shower timer -WP001

Waterpebble Shower timer.

If you can't shower with a friend, then shower with the new Waterpebble Interactive Shower timer and save on your water usage.

Waterpebble Shower timer is an eco-friendly water activated fixed time Shower timer designed to take the effort out of saving water.

No need to switch it on or off as the Waterpebble Interactive Shower timer senses the water flowing around it. Each time you shower, Waterpebble Interactive Shower timer lights up to indicate:

• Green - showering
• Yellow - you're nearly at time
• Red - end of shower - after approx 4mins

Directions of Use :

When opening the Waterpebble shower timer for the first time:

1. Simply place your new Waterpebble shower timer on the shower floor coloured side down (white side up) and allow to settle for 15-30 min or longer until you first shower, it will then sense the water and thereafter only react to water.
2. The Waterpebble is now automatically set for future showers.
3. The time it needs between showers is only 2 minutes, so it allows for a follow on shower.

Please Note:

• Waterpebble Interactive is always in learning mode so if you remove it from the shower it will "learn" this (eg. senses the "body heat" from your fingers) and reacts by re-starting it's cycle. If you then immediately introduce it to water it will go into "sleep mode" until it next senses "body heat" again. (and appears to not be working).
• If this happens simply reset it to "sense water" again by placing it back in the shower and leaving it for 15-30 minutes to reset. 
• Please refer to "Directions of Use" 1.  Simply place your new Waterpebble shower timer on the shower floor and allow to settle for 15-30 min or longer until you first shower, it will then sense the water and thereafter only react to water.