240V ITC-308 Digital Beer Fridge Temperature Controller thermostat temp heaters

240V ITC-308 Digital Beer Fridge Temperature Controller thermostat temp heaters

1. This controller is to control the temp range you want.
2. It could turn on/off heater or cooler automatically when temp reaches to setting one.
3. We have updated ITC-308 to ITC-308 WIFI. 
4. The diameter of the probe is about 5mm.

Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit; Maximum output load: 2400W(240V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control High and low-temperature alarms are available;
Over-temperature and sensor fault alarm Temperature calibration;
Heating/Cooling differential function could be set separately for refrigeration and heating to protect the temperature controller from violent change.
F/C degree display;

Specification
Temperature Control Range : -50~120 °C / -58~248 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC (It can apply to the voltage from 100V to 240V)
Buzzer Alarm: High and Low
Temperature Alarm Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
1x Manual