Stablised Handheld Gimbal for GoPro - Feiyu Tech G3

Specifications:

• Feiyu Tech G3 Ultra Gimbal
• Handheld Digital Stabilizer for GoPro 3/3+/4
• Function Instruction:
  • Heading Following Mode - Pitch and roll locking, heading smooth rotation follow the direction of the handheld.
  • Heading And Pitch Following Mode - Roll locking, heading and pitch smooth rotation follow the direction of the handheld.
  • Locking Mode - Heading, pitch and roll locking.
  • Special Working Condition (Inversion Mode) - When in any working mode, press the function button three times in succession, the Digital Stabilizer will enter into the inversion mode and switch to the Heading following mode automatically. Invert the Digital Stabilizer to capture more excited scenes easily by switching mode combination. When in inversion mode press the function button three times in succession to reset the Digital Stabilizer back to the original state.
• Operation Skill:
  • Smooth And Steady Filming: Maintain a stable movement position using the arm, which holds the FY-G3 Ultra.
  • How To Adjust The Pitching Angle: Double press the function button to enter into "Heading And Pitch Follow" mode. Hold the Digital Stabilizer at the desired angle and then press the button once to re-engage "Heading Follow" Mode in order to lock the angle of desired pitch.
  • Selfie: Turn the Digital Stabilizer 180° so the function interface is facing you. Then, simply adjust the angle of pitch to the desired angle by utilizing the "Heading and Pitch Follow" Mode, which is described above and then switch back to "Heading Follow" Mode. Once complete you can film yourself with ease.
  • Flexible Use Of Inversion Mode: Press the function button three times in succession, the Digital Stabilizer will switch to the inversion mode and help to captured low angle views more easily. If filming whilst moving forward at a high speed, keep the handle roughly parallel with the ground, this will ensure a square footage.
• Initialization Instructions:
  • Install the camera properly.
  • Digital Stabilizer to be placed on stationary flat surface and maintain a motionless status.
  • Power on the Digital Stabilizer.
  • The Digital Stabilizer is activated and it will initialize automatically. Pick up the Digital Stabilizer to work normally.
• FY-G3 ULTRA needs to be initialized whenever the following situations appear after power on:
  • After power on, the angle of pitch is not level with the horizon line.
  • After power on, the angle of roll is not parallel with the horizon line.
  • When the Digital Stabilizer is in heading lock, the angle of heading moves frequently (heading is not stationary)
• Firmware Upgrade(PC Only)(1.10 version).
• Preparation:
  • Install Driver from HERE
  • Download Firmware upgrade software HERE
  • Download New firmware 1.10 HERE
• Firmware Upgrade:
  • Open the FY-Gimbal Update for 3-Axis.exe
  • The COM port will be chosen automatically.
  • Connect your gimbal, power it on.
  • Click Open
  • Click "Open file" then chose the new firmware.
  • Click update
• See deal images for detailed specifications.
• 12 month warranty