Laser Guidence Parking System Sensor for Garages

Specifications:

• Brand new and high quality
• Protects your car from damages by parking them into the exact same spot accurately each time
• 1 car and 2 car mode
• SAA Adaptor
• Output: DC 9V
• Mounting Unit:
  • 1. Detach the black mounting bracket from the main unit
  • 2. Find a suitable place in garage and attach the mounting bracket to the ceiling or wall, using screws or double stick tape
  • 3. Slide the main unit into the black mounting bracket
  • 4. Mount the unit close to an electrical outlet (typically near the one used to power your garage door opener)
  • 5. To install the batteries, remove the battery compartment cover and install a 9V battery, make sure batteries are installed according to the +/ diagram inside
  • 6. Park your car in the desired position - Adjust the lasers so that they beam on a prominent feature of each car(typically your dashboard) - You must be able to see the spot from the driver’s seat while parking the car
  • 7. When your vehicle first enters the garage, the motion detector will turn on both lasers.  Drive forward until the laser for your vehicle hits your predetermined spot, indicating that you are parked in the correct position.  Both lasers will turn off automatically after you are parked.
• Battery Caution:
  • All batteries used must be of the same type Do not mix alkaline, standard (carbon zinc) or rechargeable (cadmium) batteries Do not mix old and new batteries 
• Package Content 
  • 1 x Laser Guidance Parking System with SAA Power
• Caution: Do not use double stick tape to mount the unit onto a ceiling, use screws to mount securely to ceiling
• NOTE: In lieu of batteries, an AC adaptor can be used to power the unit