Toilet Flush Cistern Repair Kit, Dual Flush Valve and Flush Toilet Cistern Push Button Assembly, Water-Saving Converter Kit, for 22-26cm Toilet Tank

Features:

1. COMPLETE REPAIR KIT ---- Complete replacement of the internal fittings, a complete set of everything you need to repair the tank. Ideal for integral toilets. Package Content:1 x Toilet Fill Valve;1 x Toilet Flush Valve;1 x Toilet Push Button.
2. DIMENSIONAL ---- Drain valve height 20cm, suitable for 22-26cm toilet inside the tank. Button diameter is 6.9cm", suitable for toilet tank cover aperture is about 5.8cm -6.8cm.
3. HIGH QUALITY MATERIALS ---- Made of high quality plastic and thickened stainless steel, good performance, high toughness, high temperature and corrosion resistance, longer use. suitable for use under various water pressure and water quality.
4. HIGH SEALING ---- Tight seal, double leakproof, external black sealing ring, built-in silicone white sealing ring, widened and thickened sealing ring, so as to be watertight.
5. ADAVANTAGE & DETAIL DESIGN ---- The dual flush valve provides optional full flush for powerful flushing and half flush for water-saving. that reduces your bill. Lighter pushing force, more convenient for elder and children. Anti-siphon design, built-in check valve, prevent toilet water backflow, avoid pollution of drinking water.
6. EASY TO INSTAL ---- More efficient and easy to install, with a complete set of maintenance accessories. All you need to do is remove the broken part and install a new replacement and you're ready to go.

Specifications:

• Drain valve
• Material: ABS plastic
• Flush Valve Height: 20
• Diameter of drainage port Joint: 6.-7.2
• Fit for Toilet Tank: 22-26

• Water tank button
• Main body material: ABS plastic
• Button diameter: 6.9
• Rod length: 8 (can be cut)
• Fit for toilet tank cover aperture is about 5.8cm -6.8cm

• Package Content:
• 1 x Toilet Fill Valve
• 1 x Toilet Flush Valve
• 1 x Toilet Push Button

Water inlet valve installation tutorial

1. Unscrew the nut under the black sealing washer and set aside.
2. Adjust the water inlet valve float to the appropriate inlet height.
3. Clean the area around the water tank seal before installation.
4. Place in the correct position, do not tilt.
5. Once in the correct position, screw on the fixing screws.
6. Finally, tighten the nut to complete the installation.

Drain valve installation tutorial

1. Measure the height of the original part in the original tank, the height of 22-26cm can be installed
2. Measure the size of the installation hole, the diameter is about 6-7.2cm, then you can install it.
3. Rotate the upper body of the drain valve and disassemble it.
4. Tighten the screw in the middle of the drain valve base.

Notes:

All dimensions are measured manually and there may be small deviations.

The color may have different as the difference display, Please understand.