Waterproof 1080P Hd Bike Motorcycle Camcorder Sport Camera Recorder Dv Digital Video

Description:
It’s ultra-slim and has an integrated look design.
This product can be used for a wide range of purposes and it’s an essential
recording medium for vehicle data recording,mountain climbing, Skiing,
cycling, Parachuting, diving, hunting etc applications.
It hasa variety of industry-leading features including digital video recording,
photo camera,USB 2.0 high speed and battery charger functions
-Super mini portable size
-8.0mega pixels high definition lens with 170 degree wide angle
-water-proof up to 30 meters depth
-Replaceable Lithium battery
-Video Recording while charging
- Automatic cycle cover camera,
covering time can be adjusted freely between 3 to 6 points
-Support Micro SD card up to 32GB
-PC webcam
-Built-in vibrating motor

Specification:

Lens��800MP 170A+ HD wide�\angle lens

Video Resolution��1920*1080

Video format��AVI

Video Format��30FPS

Picture resolution��3264*2448

Picture Format��JPG

Memory Card��MICRO SD

USB Interface��USB

battery��550mAh

IV.Basic operation:
I.USB DRIVE MODE
The conversion keyis under the U disk mode,
when connect to the compute, it’s U disk mode.
You can play the files of Micro SD card and delete the unnecessary files

II.Webcam mode
Transformation key in the U disk mode,
connecting tothe computer is a U disk model,
can be playedand delete the video filesin the MICRO SD.
Conversion button underthe U disk mode,
it will be show the removable disk card when you connect the computer.
click the power button, open the computer in the root directory,
will be a sign of a camera,
click on the camera symbol can be entered into a webcam model

III. Video recording while charging mode
Conversion key under therecording whilecharging,
connectingcomputer or car charging source, press the product function key,
camera into therecording videowhile the chargingor taking pictures.
while in the state of charging

Note: whenrecording video while charging,
please press the function key to save the file before you exit the USB,
otherwiseitwill not be able to save the video file

IV.Battery charging
1.with charger:Connect one end of the data cable with the charger that comes
with thecamera and the other end with the video camera,plug into the power.
2.With computer:Connect one end of the USB cable with the computer
and the otherend with the video camera.
3.With car battery charger:Connect the car battery charger directly
with the camera’sUSB interface.
4. When the camera is in the charging, the red light flashing slowly,
the red lightonafter a full charged.

V.Inserting and removing Micro SD card:
1.Insert the Micro SD card into the card slot as indicated until it’s fixed.
2.Press down the Micro SD card and wait until it pops out.then remove the card.

Cautions:
1.Please insert the card in the right direction into the device to avoid damage.
2.If the card is incompatible with the device,Please insert it again or try a new card.
3.Please use genuine Micro SD card.

VI.Operation of special features:
Video Recording and Photo-shooting
1.Under the video mode, long press the power button �?
product vibrationcontinuallywhich meansthe camera open,
bluelight long on, video into standby mode,
short press the function key⑨began tostartvideo, blue lights flash slowly,
then short press functionkey�?nbsp;to pause and save the videofiles.

2.Cameraopens, the mode key in photo-shootingmode,
the red lightlong on and enter intothe photo standby mode,
short press the function�?
the camera will shootcontinually, take a picture every 3 seconds,
red light flash slowly , if you need suspended, short press the function key�?
PleaseNote: in standby mode,
the camera automatically shut down without any operatingin 2 minutes.


VII.Time Setting:
Time display is default for this product. Follow the instructions as below
If you want to delete the time display on the video
1. Create a new Time File under the root directory. Edit the time in
yyyy.mm.dd.hr:min:secN 3format (e.g.2012.09.09 12:30:00N3).
Saveand exit the file, the time setting is completed. And it will
not be displayed next time when you turn on the camera.

2. Follow the following instructions if you want the time to be
displayed on the camera: Create a new Time File under the rootdirectory.
Edit the time in yyyy.mm.ddhr:min:secY 3 format (e.g.2012.09.09 12:30:00Y 3).
Save and exit the file, the time modificationis now completed.
And time will be displayed next time when youturn on the camera.
If need to modify the cycle time,
can change at the end of the format "3" tothecycle timeyou want.
Note: "Y" represents time in format,
"N" meansno timedisplay,
"3" means the loop videorecordingand every 3 minutes to save a file,
(can be set up for 3 to 6 minutes, not in this range,
the camera loop in 3 minutes by default.)