FlightLine Spitfire Mk.IX 1600mm (63") Wingspan PNP EPO RC Plane Airplane RC Model

Grass capable landing gear with suspension struts and 5mm thick steel pin and metal trunion
Scale four panel split flaps
Big 16x10 Propeller, 5055-390KV brushless motor and 80A ESC with EC5 connector
LED wingtip lights and dorsal signal light
17g digital hybrid servos, brass ball links, and nylon hinges on all control surfaces
Machine Screw Inserts molded into the spinner backplate to easily adjust blade tracking while mounted on the motor
Removable wings, cannon, and antenna for easy transport
Central Control Board for organized wiring
Access holes to adjust Elevator/Rudder linkages without removing the wing
Gyro ready plywood area near CG location
Two decal sets included: MA621 DV-A, Squadron Leader Tony Gaze, 129 Squadron, 1943 and BS393 GW-Z for Lt. Michel Boudier, 340 Squadron, 1942
Additional sets made available by Callie Graphics, including George Beurling, Pierre Clostermann, etc.

Includes:
FlightLine Spitfire Mk.IX 1600mm (63") Wingspan - PNP
Motor, ESC, servos, LED lights and retracts pre-installed

Requires:
6 Channel Radio
6 Channel Receiver
6 Cell 22.2V 4000 to 6000 mAh LiPo battery with EC5 connector
6 Cell Compatible Battery Charger

Wingspan 1600mm / 63in
Length 1350mm / 53.1in
Flying Weight 2850g / 100.53oz
Power System Brushless 5055-390Kv Brushless Outrunner Motor
Electronic Speed Control 80A Brushless with EC5 connector
Propeller 16x10 4 Blade Propeller
Servos 

17g metal gear standard with 600mm lead: left aileron, right aileron
17g metal gear standard with 400mm lead: left flap, right flap
17g metal gear standard with 200mm lead: elevator, rudder
Main Gear: full metal, shock absorbing struts with electronic retracts
Landing Gear Electric retracts with metal trunions
Ailerons    Yes
Elevator Yes
Rudder   Yes
Flaps Yes
Lights Yes
Hinge Type Nylon reinforced hinges
Material   EPO Foam
Skill Level    Advanced Intermediate / Advanced
Build Time    120 Minutes
Recommended Environment    Outdoor